Allows access to cooking/heating modes that do not have a direct access touchpad.
More Modes
Additional modes are available by pressing the More Modes touchpad. These modes include Convection Broil, Warm, Pizza, Proof Dough and Roast. These are discussed in the Getting the Most Out of Your Appliance section later in this manual.
Display Symbols
Door Lock - Is displayed when the oven door is locked.
Fast Preheat Symbol - Is displayed
when Fast Preheat is active.
Probe Symbol - Appears when a probe is detected.
Panel Lock - Is displayed when the control panel is locked.
Self Clean - Is displayed when Self
Clean is active.
Before Using the Oven for the First Time
•Oven must be properly installed by a qualified technician before use.
•Remove all packing materials from inside and outside the oven.
•While cool, wipe with a clean, damp cloth and dry.
•There may be a slight odor during first uses; this is normal and will disappear.
•Optimum cooking results depend on proper bakeware being used.
English 15
•Read and understand all safety precautions and Use and Care Manual information prior to operating.
Operation
About the Appliance
Your new oven combines premium cooking results and simple operation.
The oven design has been optimized to improve heat distribution in the oven cavity. The result is even browning, shorter cooking times and lower energy consumption.
Thanks to the
Clear labeling of the touch pads makes operating the oven very easy. This manual includes all instructions for operating the oven.
Please call us if you ever have any questions. Our telephone number is located at the beginning of this manual. We welcome your comments and suggestions!
Basic Features
Setting the Clock
The oven includes time functions that require the current time to be set. It is therefore important to set the clock before beginning to use the oven. The oven cannot be in a cooking mode to access the clock set mode.
To set the clock:
1.:The oven must be in
2.To access the clock set mode:
Press the Settings touchpad. The display shows “SET CLOCK”. Press Enter to edit the clock.
3.Use the numeric keypad to enter the desired time. Each number pressed is entered at the right and moving previously entered digits to the left. To set “12:45 pm”, press 1, 2, 4, 5.
4.When the desired time is entered, set the time by pressing Enter.
The clock is now set and running.