Bosch Appliances HDI8054U manual Settings Menu Options, To make changes to Settings Menu Items

Settings

The oven setup menu is used to customize certain oven settings.

The oven must be in Stand by mode (no cooking mode or timer running) in order to access the setup menu.

To make changes to Settings Menu Items:

1.Press the Settings touchpad.

2.The first setup item is displayed. The display shows “SET CLOCK”. Press Settings again to access the settings menu.

3.To display a different setup item, press the number corresponding to that setting (see table following or press the Settings touchpad to cycle through available options).

4.To change the value for the displayed setting press the Enter touchpad to enter the edit mode. Use the numeric keypad to change the setting value. The corresponding setting value is shown in the table following.

For the temperature offset, with the item in edit mode, press “-” or “+” first, then the numeric offset value.

The new value is automatically accepted as the display reverts from edit mode back to display mode.

To exit the Settings menu:

Press the Clear On/Off touchpad.

Settings Menu Options

	Menu Item	Description	Default
1	Temperature	Fahrenheit (° F) or	°F
	Mode	Celsius (° C)
2	Brightness	High, Medium, Low	High
3	Volume	High, Medium, Low	MED
4	Clock mode	12-hour or 24-hour display	12HR
		mode. 12HR, 24HR.
5	Auto	Decreases oven temperature	OFF
	Convection	by degrees set for convection
	Conversion	cooking modes. On, Off.
6	Button Beep	Tone when touchpad is	OFF
		pressed. On, Off.
7	Stand by	Clock displays when no	ON
	Clock	cooking mode or timer is in
	Display	use. ON, OFF.
8	Language	Language setting: English,	EN
		(EN), French, (FR)
9	Temperature	Sets the temperature offset	0
	Offset	value for Bake, Convection
	Note:	Bake, Roast, Convection
	Temperature	Roast and Convection Multi-
		Rack. When an offset value is
	offsets must	entered, the actual oven
	always be	temperature is increased or
	entered as 2
		decreased by this value. This
	digits.	feature is useful if food is
	Example:
		consistently either too brown
	5° F is	or too light.
	entered as	The range for changing the
	05.	offset is between +/- 35° F (+/

- 19° C) in 1° increments. The default value is 0.

English 20