Panasonic SC-HTB20 Advanced operations, Changing the dual audio, Auto gain control, Others

Page 25

Advanced operations

Changing the dual audio

Change the dual audio from main to secondary.

1Confirm the digital audio output setting on the

connected TV or player, etc. is set to “Bitstream”.

2Press and hold [TV] for more than 2 sec.

3While the indicator of the current setting is blinking, press [TV] to change the setting.

A: Main

B: Secondary (SAP: Secondary Audio

Program)

A, B : Main and secondary

≥The setting works only when the dual audio is available in the audio source.

≥The setting is maintained until it is changed again.

≥The same setting is used for [TV] and [BD/DVD] audio sources.

To turn off the 3D surround effect and clear-mode dialog effect

Depending on your preference, it is possible to use only the Dolby Virtual Speaker effect by turning off the 3D surround effect and the clear-mode dialog effect.

1Press and hold [BD/DVD] on remote controller for

more than 2 sec.

≥The indicator for the current setting blinks for 10 sec.

Dolby Digital indicator blinks:

3D surround effect and clear-mode dialog effect are on.

PCM indicator blinks:

3D surround effect and clear-mode dialog effect are off.

2While the indicator is blinking, press [BD/DVD] to

change the setting.

≥The setting changes each time [BD/DVD] is pressed.

≥The setting will be reset to on when this system is turned off.

≥When off is selected, the dialog effect level cannot be adjusted.

Auto gain control

This function adjusts the volume automatically when the volume exceeds a certain level. With this function, you can prevent sudden loud sounds.

1Press and hold [AUX] on remote control for more than 2 sec.

≥The indicator for the current setting blinks for 10 sec.

Dolby Digital indicator blinks:

Auto gain control is on.

PCM indicator blinks:

Auto gain control is off.

2While the indicator is blinking, press [AUX] to change

the setting.

≥The setting changes each time [AUX] is pressed.

≥The setting is maintained until it is changed again.

≥Default setting of this function is OFF.

Others

The following settings are unnecessary under general usage conditions of the system.

∫Remote control code

When other Panasonic devices respond to this system’s remote control, change the remote control code on the active subwoofer and the remote control.

Preparation

≥ Turn off all other Panasonic products.

Operations

≥ Turn on this system.

 

Change the remote control code to code 2:

 

1 Aim the remote control at this system’s remote control

 

sensor.

 

2Press and hold [MUTE] and [BD/DVD] on the remote control for more than 4 sec.

≥All the indicators will blink for 10 sec when the code of this system is changed.

≥The setting is maintained until it is changed again.

≥If this system does not operate after changing the code, repeat steps 1 and 2.

≥To change the remote control code to code 1, repeat the steps above, but replace [BD/DVD] with [TV].

(Continued on the next page) 25

VQT4D53

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Home Theater Audio System Placement Button-type battery Lithium batteryUnit FCC Note Following Applies only in the U.S.ATable of Contents Supplied items AccessoriesSystem SC-HTB20 REEX1267A WhiteControl reference guide Standby/on switch Í/IActive subwoofer To replace a button-type battery Remote controlClean the system with a soft, dry cloth Unit carePlace the speakers using Stands Speaker feet Speaker bases Selecting the placement method≥Choose a placement method that suits you best When placing the speakers in front of the TV When attaching the speakers to a wallWhen carrying the active subwoofer Speaker systemAssembling the speakers When placing the speakers on a wallPlace the speakers horizontally  Fit the speaker securely onto the screws with the holes Drive a screw not supplied into the wallWhite 177 mm 631/32q I 200.5 mm 757/64qAttach the front ornaments Place the speakers verticallyConnect the speaker cables Front view Rear viewWhen placing the speakers on a table Place the speakers using the standsFit the speakers securely onto the screws with the holes   Place the speakers using the speaker feetSpeaker foot Place the speakers using the speaker bases Vertical placement Horizontal placementWhen placing the speakers on a wall Cord not supplied Wall Screw eye not suppliedWhen placing the speakers on a table Horizontal placement Vertical placementConnections What is ARC?Make the connection 3D compatibilityPreparation Connection with other devicesHdmi standby pass-through Active subwooferSpeaker cable connection AC power supply cord connectionConnect to the terminals of the same color   REDPress i VOL j to adjust the volume of the speakers Using this unitPress Í to turn on the system Press Mute3D sound To adjust the dialog effect levelImage of 3D sound field Audio output modes To change the audio output modePress and hold Mute for more than 2 sec Linked operations with the TV Viera LinkTM Hdavi ControlTM What is Viera Link Hdavi Control?Advanced operations Remote control codeChanging the dual audio Auto gain controlTo turn off the volume limitation TroubleshootingTo reduce the clear-mode dialog effect To turn off Viera Link Hdavi ControlSound Indicator blinks for 10 sec Indicator illuminationHdmi SpecificationsCarry-In or Mail-In Service Limited WarrantyLimited Warranty Limits And Exclusions Panasonic Canada Inc Limited Warranty only for CanadaMississauga, Ontario Ambler DriveL4W 2T3
Related manuals
Manual 2 pages 23.98 Kb

SC-HTB20 specifications

The Panasonic SC-HTB20 is an impressive soundbar designed to elevate your home audio experience. This sleek and stylish soundbar offers an array of features that enhance your television viewing and music listening. Its slim profile makes it an ideal addition to any living space, allowing for easy placement while ensuring that it doesn’t overwhelm your decor.

One of the standout features of the SC-HTB20 is its compact size coupled with powerful sound performance. The soundbar is equipped with a built-in subwoofer that delivers deep bass, enriching the audio output for movies, music, and games. With a total power output of 80 watts, it offers a substantial audio experience that can fill even larger rooms effectively.

The design of the SC-HTB20 is not only aesthetically pleasing but also functional. It features a minimalist design with a black finish, making it easy to blend in with most home theater setups. Various connection options are available, including Bluetooth, allowing you to wirelessly stream music from your smartphone or tablet. Additionally, it comes with HDMI ARC (Audio Return Channel), which simplifies connectivity to your TV and allows for easy control with your TV remote.

When it comes to sound technologies, the SC-HTB20 employs advanced audio processing to ensure clear dialogue and immersive sound effects. The soundbar supports virtual surround sound, which simulates a multi-channel audio experience without the need for additional speakers. This means you can enjoy a cinematic sound experience right from your couch, making it perfect for action-packed movies or dramatic series.

Another notable characteristic is the user-friendly interface and remote control, which makes operation simple and intuitive. It also features multiple listening modes that allow you to customize the audio experience based on the content you are enjoying, whether it be movies, music, or dialogue-heavy shows.

In summary, the Panasonic SC-HTB20 is an excellent soundbar that combines sleek design with impressive audio technology. Its built-in subwoofer, Bluetooth connectivity, and HDMI ARC compatibility make it a versatile choice for any home entertainment setup. Whether you're a movie enthusiast or a music lover, the SC-HTB20 promises to enhance your audio experience significantly.
Top Page Image Contents