Panasonic SC-HTB15 Indicator illumination, Dual audio cannot be changed from main to secondary

Page 27

≥If the connections are correct, there might be a problem with the cables. Redo the connections with different cables.

≥Check the audio output settings on the connected device.

≥If the HDMI 2 indicator flashes and there is no audio output, try the following.

1 Turn the connected device off and then on.

2 Turn off this system, remove the HDMI cable, then reconnect the HDMI cable and turn this system back on.

The dual audio cannot be changed from main to secondary.

If the audio received from the connected device is not “Dolby Dual Mono” or the output setting is not “Bitstream”, the setting cannot be changed from this system. Change the setting on the connected device.

The volume is lowered when this system is turned on.

If this system is turned off with the volume setting in the greater half (above 50), this system will automatically lower the volume to the middle (50) when this system is turned on. (> 25)

The dialog is too persistent or the dialog does not sound natural.

This system has a function to make the dialog stand out when the volume is low. (> 25)

There is no audio.

The power of this system turns off automatically.

(When this system detects a problem, a safety measure is activated and this system automatically switches to standby mode.)

≥There is a problem with the amplifier.

≥Is the volume extremely high? If so, lower the volume.

≥Is this system placed in an extremely hot place?

If so, move this system to a cooler place and wait a few moments and then try to turn it on again.

If the problem persists, confirm the TV indicator and HDMI 2 indicator blink, turn the system off, remove the AC power supply cord and consult your dealer. Please be sure to remember the indicators that were blinking and inform the dealer.

Indicator illumination

The indicators display the condition of this system by flashing. The indicator patterns illustrated below are displayed during normal operational conditions. They do not refer to the indications of a problem. Refer to “Troubleshooting” (> 26) if the indicators do not light as illustrated below.

Indicator

Description

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The indicators blink from left to right (i) or from right to left (s).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

≥ When the speaker volume or the subwoofer level is adjusted (> 22)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The indicators blink simultaneously.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

≥ When “MUTE” is on (> 22)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The indicator blinks for 10 sec.

 

 

 

 

 

 

 

 

 

 

≥ When the audio output mode is Multi-channel mode (> 23)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

≥ When 3D surround effect and clear-mode dialog effect are on (> 25)

 

 

 

 

 

 

 

 

 

 

≥ When the dual audio setting is Main (> 25)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The indicator blinks for 10 sec.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

≥ When the audio output mode is Auto mode (> 23)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The indicator blinks for 10 sec.

 

 

 

 

 

 

 

 

 

 

≥ When the audio output mode is 2ch mode (> 23)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

≥ When Dolby Virtual Speaker is on (> 25)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

≥ When the dual audio setting is Secondary (SAP: Secondary Audio Program)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(> 25)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The indicators blink for 10 sec.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

≥ When the dual audio setting is Main and Secondary (> 25)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The indicators blink for 10 sec.

≥When the remote control code is changed (> 25)

The indicators blink once.

≥ When changing the setting (To turn off VIERA Link “HDAVI Control”, To reduce the clear-mode dialog effect and To turn off the volume limitation) (> 25)

Reference

27

VQT3Q59

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Home Theater Audio System Button-type battery Lithium battery PlacementUnit FCC Note Following Applies only in the U.S.ATable of Contents Accessories Clean the system with a soft, dry clothUnit care Standby/on switch Power Í/I Control reference guideActive subwoofer To replace a button-type battery Remote controlPlace the speakers using Stands Speaker feet Base stands Selecting the placement methodSpeaker system When placing the speakers on a wallWhen placing the speakers in front of the TV When carrying the active subwooferUse screws a to secure the speakers to the speaker joint When placing the speakers on a wallAssembling the speakers Place the speakers horizontallyDo not Connect the speaker cablesDrive a screw not supplied into the wall Fit the speaker securely onto the screws with the holesPlace the speakers vertically Fit the speakers securely onto the screws with the holes∏ 1 Speaker L ∏ 1 Speaker R When placing the speakers on a table Place the speakers using the standsSpeaker joint Stands Screws a Large Speaker foot a supplied Speaker foot B supplied Place the speakers using the speaker feetSpeaker L Speaker R Speaker cables RED Speaker joint Screws a Speaker feet LargeBases Screws B Small Place the speakers using the base standsInsert the speaker cable through the base Attach the speaker to the baseCord not supplied Wall Screw eye not supplied When placing the speakers on a wallHorizontal placement Vertical placement Speaker fall prevention measuresHorizontal placement Vertical placement   When placing the speakers on a tableVerify if the TV’s Hdmi terminal is labeled Hdmi ARC ConnectionsBasic connection Labeled Hdmi ARCNot labeled Hdmi ARC Active subwooferOptical digital audio cable not supplied Blu-ray Disc Player Connection with Hdmi compatible devicesPreparation Hdmi standby pass-throughRED AC power supply cord connectionSpeaker cable connection Connect to the terminals of the same color  Press Mute Using this unitPress i VOL j to adjust the volume of the speakers Audio format indicatorPress and hold Mute for more than 2 sec To change the audio output mode3D sound Audio output modesWhat is Viera Link Hdavi Control? Linked operations with the TVViera LinkTM Hdavi ControlTM Advanced operations Troubleshooting General operationSound Indicator illumination Volume is lowered when this system is turned onDual audio cannot be changed from main to secondary Hdmi SpecificationsParts Labor Limited WarrantyCarry-In or Mail-In Service Limited Warranty Limits And ExclusionsFor hearing or speech impaired TTY users, TTY As of December For hearing or speech impaired TTY users, TTYProduct Operation Assistance Warranty ServicePanasonic Canada Inc Limitations and ExclusionsCorporation of North America
Related manuals
Manual 32 pages 62.22 Kb

SC-HTB15 specifications

The Panasonic SC-HTB15 is an impressive soundbar system that enhances your home entertainment experience by delivering high-quality audio performance without taking up too much space. Designed to seamlessly complement the aesthetics of modern televisions, this compact soundbar is packed with essential features and technologies that elevate both music listening and movie watching.

One of the standout features of the SC-HTB15 is its power output. With a total power output of 120 watts, it provides a substantial audio experience that fills the room with rich, clear sound. The soundbar is equipped with a built-in subwoofer that contributes to deep, resonant bass, allowing you to feel the energy of your favorite movies, shows, and music tracks.

The SC-HTB15 utilizes Bluetooth connectivity, making it incredibly easy to stream music from your smartphone, tablet, or other compatible devices. This wireless feature adds convenience, allowing you to enjoy your favorite playlists or podcasts without the hassle of wires. The soundbar also supports a wide range of audio formats, ensuring versatility in playback options.

In terms of design, the Panasonic SC-HTB15 is sleek and compact, enabling it to fit perfectly under your TV or on a shelf without occupying much space. Its minimalist style blends effortlessly with various home decor choices while providing a modern touch.

The soundbar’s enhanced audio technologies include Dolby Digital processing, which creates a more immersive sound experience. This feature is particularly advantageous when watching films with dynamic soundscapes or listening to music with complex arrangements. The sound quality is refined, making dialogues clear and music rich, allowing for a captivating audio experience.

Setup is straightforward as well, with a simple connection process that includes both optical and HDMI ARC inputs, ensuring compatibility with a range of televisions and audio sources. Additionally, the soundbar features a remote control that provides convenience, allowing you to adjust volume levels, switch inputs, and more from the comfort of your couch.

In summary, the Panasonic SC-HTB15 is an exceptional soundbar that offers high-quality audio performance, Bluetooth streaming, and an elegant design. Its combination of a powerful built-in subwoofer, Dolby Digital technology, and user-friendly features makes it an excellent choice for anyone looking to enhance their home audio experience.
Top Page Image Contents