Panasonic SC-HT895 manual Use

HT895En.book	Page13	Friday,April21,20064:17PM	≥take apart or short circuit.
STEP6	Preparing the remote control
			Do not:
Remote c ntrol		Batteries	≥mix old and new batteries.
			≥use different types at the same time.
			≥heat or expose to flame.
			≥attempt to recharge alkaline or manganese batteries.
2 Insert so the poles (i and j) match those in the remote control.			≥use batteries if the covering has been peeled off.
3			Mishandling of batteries can cause electrolyte leakage which can
			severely damage the remote control.
			Remove the batteries if the remote control is not going to be used for a
			long period of time. Store in a cool, dark place.
		1 ≥Do not use rechargeable type	∫ Use
		batteries.	Aim at the remote control signal sensor (➜ page 14), avoiding

R6/LR6, AA obstacles, at a maximum range of 7 m directly in front of the unit.

STEP7 Performing QUICK SETUP

The QUICK SETUP screen assists you to make necessary settings.

To display the picture from the main unit, turn on your television and change its video input mode (e.g. VIDEO 1, AV 1, etc.).

≥To change your television’s video input mode, refer to its operating instructions.

≥This remote control can perform some basic television operations (➜ page 36).

	1		Turn on the unit.
	DVD
ONETOUCH PLAY	2		Select “DVD/CD”.
	3		Press and hold to show
			the QUICK SETUP
			screen.
ENTER	4	Select	Follow the messages
			and make the settings.
	RETURN,
	SETUP
		Register

Simple Setup

Preparing the remote control / Performing QUICK SETUP

5	Press to finish QUICK
ENTER	SETUP.
6	Press repeatedly to exit.

To change these settings later

Select “QUICK SETUP” in the “Others” tab (➜ page 28).

RQT8607

13