3.5CONNECTING VCRs TO THE VIDEO MATRIX BAY (CM9760-MXB)
VCRs must be connected to the
(1)One to run from the VIDEO OUT port on the back of the VCR to the desired IN port on the VMB.
(2)The other to run from the VIDEO IN port on the VCR to the desired OUT port on the Video Matrix Bay.
VCR (REAR VIEW) |
VIDEO MATRIX BAY |
INPUT PORTS |
(UP TO 16 CARDS, 16 PORTS PER CARD) |
OUTPUT PORTS |
(1 CARD, 16 PORTS PER CARD) |
Figure 10. Connecting VCRs to the CM9760-MXB (Video Matrix Bay)
12 | Pelco Manual C544M (2/98) |