Pelco DD53CBW-X manual Zones, To edit a zone label

Page 37

Zones

SPECTRA III

LANGUAGEENGLISH

<SYSTEM INFORMATION> <DISPLAY SETUP> <DOME SETTINGS>

ACK ALERT*

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

EXIT

DOME SETTINGS

<CAMERA>

<MOTION> <POWER UP> <LINE SYNC> <PRESETS> <PATTERNS> <ZONES>

<WINDOW BLANKING> <ALARMS>

<AUX>

<TITLE TEXT> <ALERT>* <CLEAR> <PASSWORD>

BACK

EXIT

ZONES

ZONE NUMBER

1

* * * ZONE NOT DEFINED * * *

 

<EDIT ZONE LABEL>

 

<EDIT ZONE>

 

ZONE ENABLED

NO

ZONE BLANKING

OFF

<CLEAR ZONE>

 

A zone is a pan area, defined by a left and right limit, on the 360-degree pan plane. The Spectra dome system is capable of eight zones, each with a 20-character label.

To program a zone:

1.Use the joystick to position the cursor beside ZONE NUMBER. Press Iris Open the cursor moves to the right.

2.Move the joystick up or down to view selections. Press Iris Open to enter selection.

3.Use the joystick to position the cursor beside EDIT ZONE.

4.Press Iris Open. The Zone programming window appears on the monitor.

5.Follow the directions displayed on the monitor. After the left and right limit stops are set, the Zones menu reappears with the ZONE ENABLED option set to YES.

To edit a zone label:

 

1.

Use the joystick to position the cursor beside EDIT ZONE LABEL.

2.

Press Iris Open. The following appears on the monitor:

 

LABEL FOR ZONE

 

 

ZONE NUMBER ------

OK

 

1234567890

 

ABCDEFGHIJ

CANCEL

 

KLMNOPQRST

 

 

UVWXYZ.,-/

SPACE

 

abcdefghij

BACKSPACE

 

klmnopqrst

 

 

uvwxyz#&:*

 

3.Use the joystick to position the cursor beside a character. Press Iris Open to enter selection. To clear a character, position the cursor beside BACKSPACE, and then press Iris Open.

4.When the label is completed, move the cursor the OK. Press Iris Open to return to the Zones menu.

To disable a zone (a zone is enabled automatically when it is programmed) or to blank a zone:

BACK

EXIT

*This setting only applies to Pressurized Spectra III SE dome systems with software version 1.25 or higher.

1.Move the cursor beside ZONE ENABLED or ZONE BLANKING.

2.Press Iris Open. The cursor moves to the right.

3.Move the joystick up or down to view selections. Press Iris Open to enter selection.

To clear a zone:

1.Use the joystick to position the cursor beside CLEAR ZONE.

2.Press Iris Open. Follow the instructions on the screen.

Quick Programming Guide

(See page 11)

C2445M-E (11/05)

37

Image 37
Contents Models DD53CBW & DD53CBW-X OPERATION/PROGRAMMINGPage Page Page Contents Activate AUX Command Welcome Configure DoneGetting Started Pelco Spectra III SE Version Address Comm 2400, N, 8HOW to Operate Your Dome System CM6700/CM6800 Accessing Main Menu PresetNET300/NET350/NET4001A Preset Function Following presets are reserved for special functionsC2445M-E 11/05 Quick Programming Guide LanguageSee System Information Display Setup Label Position Camera Dome SettingsType of Lighting Auto FocusZoom Speed Zoom LimitLOW Light Limit HighAuto IR Level IR CUT FilterDark Shutter Speed Advanced Camera SettingsAGC Limit Numeric ValueAuto Iris Peak Auto IrisAuto White Balance Auto SharpnessGain OFF default There are two backlight compensation settingsBacklight Compensation BLC Wide Dynamic Range Video LevelNormal Wide Dynamic Range onThere are two auto flip modes On default Motion SettingsAuto Flip Proportional PANPark Action Park TimeScan Speed Preset Freeze FrameManual Limit StopsScan Azimuth Zero Power UP Action Power UpNone Dome synchronizes to an internal clock Line SyncFollowing presets are predefined for specific functions PresetsPreset Action Determined zero reference pointPresets Patterns Zones Edit Detection Areas Enable Motion DetectionAUX Time Activate AUX CommandPatterns To edit a zone label ZonesWindow Blanking Windows are not visible when editing a new window LocationTo set a window blanking area Window Blanking Disabled Clear Window ReverseBlank ALL ABOVE/BLANK ALL below Blank All AboveResume AlarmsSequence MEDIUM/LOW This setting only applies to Latching AuxMomentary Title Text Repeat AlertSystem Condition Alert Message ACK Action Reset AlertActivate AUX Current ReadingClear ALL PresetsALL Zones ALL PatternsPassword Reset Camera RESET, Cycle POWER, RebootCycle Camera Power Reboot SystemUpload Icon SOFTWARE/LANGUAGE File UploadUpload Icon DD53CBW SpecificationsDD53CBW-X NtscRadio and Television Interference Regulatory NoticesPage Page ISO9001

DD53CBW-X specifications

The Pelco DD53CBW-X is an advanced outdoor PTZ (pan-tilt-zoom) camera designed for high-performance surveillance in various environments. This model is part of Pelco's extensive lineup of security solutions, known for their durability and innovative technology.

One of the standout features of the DD53CBW-X is its high-definition imaging capabilities. It boasts a 2-megapixel high-definition resolution, providing detailed images that are crucial for identifying subjects and capturing clear footage in demanding conditions. The camera supports multiple video streams, allowing users to access real-time monitoring while recording at different resolutions for more efficient bandwidth usage.

The DD53CBW-X incorporates a powerful optical zoom lens, offering up to 30x optical zoom. This feature enables users to focus on distant subjects without compromising image quality. The camera also supports digital zoom, enhancing its versatility in various surveillance scenarios. Whether monitoring a wide area or zooming in on specific details, this PTZ camera remains effective.

Another key aspect of the DD53CBW-X is its robust construction, designed for all-weather performance. It features an IP66 rating, ensuring it is dust-tight and can withstand heavy rain and other environmental challenges. This rugged design makes it suitable for deployment in outdoor settings, including parking lots, perimeters, and public spaces.

The camera is equipped with advanced low-light technology, allowing it to deliver clear images even in challenging lighting conditions. With features such as adaptive IR illumination, the DD53CBW-X can capture quality video in complete darkness, making it a reliable option for 24/7 surveillance.

Additionally, the DD53CBW-X supports various network protocols for flexible integration into existing security systems. Its compatibility with ONVIF ensures that it can operate seamlessly with a wide range of software and video management systems. Furthermore, the camera offers intelligent analytics capabilities, including motion detection and line crossing alerts, which enhance security efforts by automating monitoring processes.

In summary, the Pelco DD53CBW-X is a high-performance PTZ camera that combines advanced imaging technology, rugged design, and intelligent features. Its versatility makes it suitable for a range of surveillance applications, ensuring comprehensive security solutions for both commercial and residential environments. With its focus on quality and reliability, the DD53CBW-X stands out as a top choice for modern surveillance needs.