Pelco DD53CBW-X manual Enable Motion Detection, Edit Detection Areas

Page 34

SPECTRA III

LANGUAGEENGLISH

<SYSTEM INFORMATION> <DISPLAY SETUP> <DOME SETTINGS>

ACK ALERT*

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

EXIT

DOME SETTINGS

<CAMERA>

<MOTION> <POWER UP> <LINE SYNC> <PRESETS> <PATTERNS> <ZONES>

<WINDOW BLANKING> <ALARMS>

<AUX>

<TITLE TEXT> <ALERT>* <CLEAR> <PASSWORD>

BACK

EXIT

PRESETS

PRESET NUMBER

1

* * * PRESET NOT DEFINED * * *

 

<EDIT PRESET LABEL>

 

<EDIT PRESET SCENE>

 

<EDIT CAMERA SETTINGS>

 

<MOTION DETECTION>

 

<CLEAR PRESET>

 

<CLEAR CAMERA SETTINGS>

 

BACK

 

EXIT

 

REFERENCE INFORMATION

-

AZIMUTH

ELEVATION

-

ZOOM RATIO

-

CUSTOM CAMERA SETTINGS

-

MOTION DETECTION

MOTION DETECTION ENABLED

ON

<EDIT DETECTION AREAS>

 

ACTIVATE AUX

OFF

AUX TIME (SECS)

0

BACK

 

EXIT

 

*This setting only applies to Pressurized Spectra III SE dome systems with software version 1.25 or higher.

ENABLE MOTION DETECTION

The following are the settings for MOTION DETECTION ENABLED:

OFF (default)

Motion detection is turned off (disabled).

ON

Motion detection is turned on (enabled).

NOTE: Motion detection does not work if the shutter speed is set at less than 1/60 of a second.

EDIT DETECTION AREAS

Four motion detection areas can be defined for a preset. Use the following steps to edit motion detection areas.

1.Edit detection areas 1, 2, 3, or 4:

a.Use the joystick to position the cursor beside EDIT DETECTION AREAS.

b.Press Iris Open. The EDIT DETECTION AREAS programming window appears on the monitor.

c.Use the joystick to position the cursor beside LOCATION for DETECTION AREA 1, 2, 3 or 4.

d.Press Iris Open. The cursor moves to the right next to the number 0.

e.Move the joystick up. A blue rectangle appears in the upper left-hand corner of the screen.

f.Use the joystick to place the blue rectangle over the desired detection area.

g.Press Iris Open to make a selection.

2.Set the sensitivity of the motion detection area:

a.Position the cursor next to SENSITIVITY for DETECTION AREA 1, 2, 3 or 4.

b.Press Iris Open, the cursor moves to the right.

c.Use the joystick to select one of the following sensitivity levels:

HIGH

The sensitivity level is high. Slight changes in light

 

level and contrast are detectable.

MEDIUM (default)

Average sensitivity.

LOW

The sensitivity level is low.

d.Press Iris Open to make selection.

EDIT DETECTION AREAS

DETECTION AREA 1

LOCATION0

SENSITIVITYMEDIUM

DETECTION AREA 2

LOCATION0

SENSITIVITYMEDIUM

DETECTION AREA 3

LOCATION0

SENSITIVITYMEDIUM

DETECTION AREA 4

LOCATION0

SENSITIVITYMEDIUM

BACK

EXIT

34

C2445M-E (11/05)

Page 33 Page 35
Image 34
Page 33 Page 35
Contents OPERATION/PROGRAMMING Models DD53CBW & DD53CBW-XPage Page Page Contents Activate AUX Command Getting Started Configure DoneWelcome Pelco Spectra III SE Version Address Comm 2400, N, 8HOW to Operate Your Dome System Accessing Main Menu Preset CM6700/CM6800NET300/NET350/NET4001A Following presets are reserved for special functions Preset FunctionC2445M-E 11/05 Quick Programming Guide LanguageSee System Information Display Setup Label Position Type of Lighting Dome SettingsCamera Auto FocusLOW Light Limit Zoom LimitZoom Speed HighAuto IR Level IR CUT FilterDark AGC Limit Advanced Camera SettingsShutter Speed Numeric ValueAuto Iris Auto Iris PeakAuto White Balance Auto SharpnessGain OFF default There are two backlight compensation settingsBacklight Compensation BLC Normal Video LevelWide Dynamic Range Wide Dynamic Range onAuto Flip Motion SettingsThere are two auto flip modes On default Proportional PANPark Time Park ActionPreset Freeze Frame Scan SpeedManual Limit StopsScan Azimuth Zero Power UP Action Power UpNone Line Sync Dome synchronizes to an internal clockPreset Action PresetsFollowing presets are predefined for specific functions Determined zero reference pointPresets Patterns Zones Enable Motion Detection Edit Detection AreasActivate AUX Command AUX TimePatterns Zones To edit a zone labelWindow Blanking Windows are not visible when editing a new window LocationTo set a window blanking area Window Blanking Disabled Blank ALL ABOVE/BLANK ALL below ReverseClear Window Blank All AboveResume AlarmsSequence MEDIUM/LOW This setting only applies to Latching AuxMomentary Title Text Repeat AlertSystem Condition Alert Message Activate AUX Reset AlertACK Action Current ReadingALL Zones ALL PresetsClear ALL PatternsPassword Cycle Camera Power RESET, Cycle POWER, RebootReset Camera Reboot SystemUpload Icon SOFTWARE/LANGUAGE File UploadUpload Icon DD53CBW-X SpecificationsDD53CBW NtscRegulatory Notices Radio and Television InterferencePage Page ISO9001

DD53CBW-X specifications

The Pelco DD53CBW-X is an advanced outdoor PTZ (pan-tilt-zoom) camera designed for high-performance surveillance in various environments. This model is part of Pelco's extensive lineup of security solutions, known for their durability and innovative technology.

One of the standout features of the DD53CBW-X is its high-definition imaging capabilities. It boasts a 2-megapixel high-definition resolution, providing detailed images that are crucial for identifying subjects and capturing clear footage in demanding conditions. The camera supports multiple video streams, allowing users to access real-time monitoring while recording at different resolutions for more efficient bandwidth usage.

The DD53CBW-X incorporates a powerful optical zoom lens, offering up to 30x optical zoom. This feature enables users to focus on distant subjects without compromising image quality. The camera also supports digital zoom, enhancing its versatility in various surveillance scenarios. Whether monitoring a wide area or zooming in on specific details, this PTZ camera remains effective.

Another key aspect of the DD53CBW-X is its robust construction, designed for all-weather performance. It features an IP66 rating, ensuring it is dust-tight and can withstand heavy rain and other environmental challenges. This rugged design makes it suitable for deployment in outdoor settings, including parking lots, perimeters, and public spaces.

The camera is equipped with advanced low-light technology, allowing it to deliver clear images even in challenging lighting conditions. With features such as adaptive IR illumination, the DD53CBW-X can capture quality video in complete darkness, making it a reliable option for 24/7 surveillance.

Additionally, the DD53CBW-X supports various network protocols for flexible integration into existing security systems. Its compatibility with ONVIF ensures that it can operate seamlessly with a wide range of software and video management systems. Furthermore, the camera offers intelligent analytics capabilities, including motion detection and line crossing alerts, which enhance security efforts by automating monitoring processes.

In summary, the Pelco DD53CBW-X is a high-performance PTZ camera that combines advanced imaging technology, rugged design, and intelligent features. Its versatility makes it suitable for a range of surveillance applications, ensuring comprehensive security solutions for both commercial and residential environments. With its focus on quality and reliability, the DD53CBW-X stands out as a top choice for modern surveillance needs.
Top Page Image Contents