SCENE | PROGRAMMING THE INTERNET HUB |
|
|
Scene control can provide a specific brightness for multiple lights with the press of a button. Common scenes are the morning scene, the evening scene, the movie scene, etc.
To setup a scene, click the [Settings] icon on the Scene control page.
1.Enter the Scene name (e.g. Morning), then click [ADD].
Repeat this step for all the scenes that you plan to assign.
2.To specify an atmosphere for the scene, go to the [Scene Control] page and click [Settings]. You will see the below screen. For instance, in the Morning
Scene, you want to set the Island Lights in the Kitchen zone at 10% brightness. Once you have selected all the desired settings, press [SET] button.
3.You may change the name ‘Morning’ to another name.
After you input the new scene name, click [Rename] on the screen.
SCENE PROGRAMMING THE INTERNET HUB | 14 |
|
|
|
|