SkyLink HU-318 user manual Assign Zones and Lights Programming the Internet HUB

Page 8

ASSIGN ZONES AND LIGHTS PROGRAMMING THE INTERNET HUB

4.Click [Zone] on the top of the toolbar. Select the zone, e.g. [Kitchen] to assign different devices to this zone.

5.Click the [Settings] icon in the ‘Kitchen Devices Control Page’, and then assign different devices in this zone.

6.Enter the name of the device (e.g. Island Lights). Select the type of module controlled (On/Off or Toggle, Dim or Non-Dim) and then click [ADD].

ASSIGN ZONES AND LIGHTS PROGRAMMING THE INTERNET HUB	8

Image 8

Contents User’s Manual Contents Introduction Setting UP the Internet HUB Programming the Internet HUB Programming the Internet HUB Assign Zones and Lights Programming the Internet HUB Assign Zones and LightsAssign Zones and Lights Programming the Internet HUB Assign Zones and Lights Programming the Internet HUB Assign Zones and Lights Programming the Internet HUB Assign Zones and Lights Programming the Internet HUB ALL ON/OFF Programming the Internet HUBDevice Scene Scene Operation Timer To assign a timerTimer TC Remote Program TC to Wireless Modules Operation Camera Camera Camera Settings Settings allow you to set the following functionsCamera Settings Http Port MAC AddressHost Name Dhcp clientAppendix Resetting the Internet HUBResetting the Internet Hub Go to Settings Network Setting Advanced InstallationAdvanced Installation Cable /DSL Router Settings Port Forwarding / Virtual Server Advanced Installation FCC/IC FCCWarranty WarrantyPage R e l e s s C o n t r o l E v e r y w h e r e

Related manuals

Manual 20 pages 53.24 Kb