Panasonic SC-HTB10 Audio effects, The various audio effects, Changing the audio effects

Audio effects

A B CA B C

The various audio effects

Clear-mode Dialog

You can make the dialogue stand out from the background noise and also hear sound as if it is coming from the centre of the TV.

Sound Effect

You can enjoy a dynamic sound with a natural expansion.

Dolby Virtual Speaker

You can enjoy a surround sound effect similar to

5.1ch (Dolby Digital or DTS) with any audio source.

Changing the audio effects

1 Press the button for the respective effect on the remote control.

A: Clear-mode Dialog

B: Sound Effect

C: Dolby Virtual Speaker (VS)

2 The status of the selected effect is indicated for 4 sec.

A: Clear-mode Dialog

B: Sound Effect

C: Dolby Virtual Speaker (VS)

On:

The indicator lights

Off:

The indicator blinks

3 While the indicator is lit or blinking, press the same button again to change the setting.

≥When turning the audio effects on or off, there might be a slight pause in the audio. This is normal.

≥Dolby Virtual Speaker (VS) is also turned on when Sound Effect is turned on. (It will remain on even after Sound Effect is turned off.)

≥If Dolby Virtual Speaker (VS) is turned off while Sound Effect is on, the Sound Effect will also be turned off.

≥The audio format is also indicated when [VS] is pressed. (> 12)

Operating Instructions

13