
KEYPAD TRANSMITTER
When the Keypad Transmitter
Panic button (the red key on the top right of the keypad) - instantly activates the alarm, whether the audio alarm is in arm mode or not. It will always activates the alarm when the “ON” light is lit on the audio alarm.
To arm the audio alarm using the keypad transmitter:
1.Enter the current MPIN on the keypad transmitter (the MPIN is factory pro- grammed with 0 0 0).
2.Press [B], [C], the “ON” light on the keypad transmitter will flash and emit a long beep. The “ARM” light on the audio alarm will be on.
The audio alarm is now armed.
To disarm the audio alarm or terminate the siren:
1.Enter the current MPIN on the keypad transmitter.
2.Press [#], the “ON” light on the keypad transmitter will flash and emit a long beep. The “ARM” light on the audio alarm will be off.
The audio alarm is now disarmed, or the siren is turned off.
When the audio alarm is on but not armed and a remote sensor is activated, the audio alarm will emit one chime, (beep) and the “ON” light will flash once. You may deactivate the chime by pressing [Current MPIN], [C] on the keypad transmitter. For example , if people are using the front door constantly, you may choose to turn off the chime sound.
OPERATION OF THE AUDIO ALARM
The Audio Alarm is designed to work with Skylink Security System (SC10,
Program the keychain transmitter to the audio alarm
You may program as many as 15 Skylink sensors/transmitters to the audio alarm. Once any of these sensors/transmitters are activated, the sensor will send a signal to the audio alarm so that the siren (or chime) will sound.
Program sensors / transmitters to the Audio Alarm
1.Turn on the Audio Alarm, (slide the button on the bottom of the unit to "ON"), allow 30 seconds for the Audio Alarm to warm up. With only the “ON” light lit on the Audio Alarm, press and hold the learn button located on the bottom of the Audio Alarm.
2.While pressing down on the button, activate the sensors or transmitters that you want to program to the audio alarm (i.e. keychain transmitter). If you are programming the keychain transmitter, you can activate the transmitter by pressing any one of the buttons. If you are programming the keypad transmitter, you may activate it by pressing the panic button.
3.If a connection has been made, the Audio Alarm will stop beeping and make a continuous tone until the black button on the Audio Alarm is released.
Program control panel (SC-001) to the Audio
Alarm (AA-433)
1. Turn on the Audio Alarm, (slide the button on the bottom of the unit to "ON"), allow 30 seconds for the Audio Alarm to warm up. With only the 'ON' light lit on the Audio Alarm, press and hold the learn button located on the bottom of the Audio Alarm.
2.While pressing down on the button of the Audio Alarm, enter the current MPIN (Master Personal
Identification Number) on the Security Control
Panel (SC001).
3. Press [B] [B] on the Security Control Panel.
4. If a connection has been made, the Audio Alarm will stop beeping and make a continous tone until the learn button on the Audio Alarm is released.