
| LIGHTS AND SOUNDS | |||
LIGHTS |
|
|
|
|
|
|
|
| |
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
ON light lit | ||||
ALL BELOW SCENARIOS INCLUDE THE “ON” LIGHT LIT | ||||
LO BATT light off | - the Audio Alarm is being powered by electrical | |||
| current and/or the battery. | |||
LO BATT light on | - the Audio Alarm is being powered by electrical | |||
| current only, the battery is weak and needs to be | |||
| replaced. | |||
“ARM” light on | - the Audio Alarm is armed and will sound when | |||
| any sensor is activated. | |||
“ARM” light off | - the Audio Alarm is not armed and will not sound | |||
| when any sensor is activated. |
- however, it will respond to any of the buttons on the Keychain Transmitter and the panic button on any of the Security Systems.
SOUNDS
You are able to turn on/off the short beep sound made by the Audio Alarm when any of the sensors are activated, by pressing button 3 on the Keychain Trans- mitter
One long beep | - | occurs when the Audio Alarm is turned on with the button on |
|
| the bottom of the unit. |
One short beep | - | when a sensor is activated and the Audio Alarm is on but |
|
| not armed. |
| - | anytime buttons # 1, 2 or 3 is pressed on the Keychain |
|
| Transmitter |
|
| on but not armed. |
ACTIVATE AND DEACTIVATE THE SYSTEM
Now that the system is installed and the sensors are communicating with the Audio Alarm, it is time to learn how to arm and disarm the Audio Alarm.
The only way to arm and disarm the Audio Alarm is via the Keychain Transmitter and Keypad Control (option).
KEYCHAIN TRANSMITTER (4B-433A) OR (4B-434)
|
|
|
|
| Activate/deactivate the |
|
|
|
|
| chime sound made |
Turns off the siren and/ |
|
|
|
| when a sensor is |
or disarms the system |
| #3 | #2 |
| activated and the Audio |
|
| ||||
|
|
|
|
| Alarm is not armed |
Arms the system | #1 |
|
| Panic button | |
|
|
When the Audio Alarm is ON, the four buttons on the transmitter do the following:
Panic Button - instantly activates the alarm, whether the Audio Alarm is in arm mode or not. Will always activate the alarm when the “ON” light is lit on the Audio Alarm.
Button #1 - this button will arm the Audio Alarm so that the Audio Alarm will communicate with the sensors and transmitters.
Button #2 - when the system is on but not armed and a remote sensor is activated, the Audio Alarm will emit one chime, (beep). Button #2 allows you to activate or deactivate the chime sound. For example, if people are using the frontdoor constantly, you may choose to turn off the chime sound.
Button #3 - when the siren is sounding, this button will turn off the siren and disarm the Audio Alarm.
-when the siren is not sounding but the system is armed, this button will disarm the Audio Alarm.