Spirit XE 195, XE 295 owner manual Handle BAR Assembly

Page 15

•Using the 13/14mm Wrench, tighten the three bolts, and the fourth bolt which is pre-installed, firmly. These bolts should be tightened as much as you possibly can.

•There will be three electrical wire connectors at the top opening of the console mast, two 2 pin connectors for hand pulse sensors (36), one 10 pin connector for main wire harness (31) and one connector for resistance switch (124). Connect these to the mating connectors on the back of the electronic Console (30). The connectors are keyed, you cannot plug them in the wrong way so do not force them. The two, 2 pin connectors can be plugged into either connector on the back of the console.

•Storing the excess wire back into the Console Mast, carefully install the Console onto the mounting plate of Console Mast and secure using the four M5 x 10m/m Phillips Head Screws. Make sure the wires do not get pinched between the console and mounting plate.

STEP 2: HANDLE BAR ASSEMBLY

•Install the two 17m/m Wave Washers (83) onto the Left and Right side of the Handle Bar axle.

•Slide the Left (10) and Right (11) Handle Bars onto the appropriate side of the axle. The handlebars have a small sticker on them indicating L (left) and R (right).

•Put the two 5/16" x 23mm Flat Washers onto the two 5/16" x 15m/m Hex Head Bolts and install, and tighten, in the threaded holes in the ends of the axle.

14

XE195 / XE295 Elliptical

 

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Elliptical Table of Contents Record Your Serial Number Product RegistrationSave These Instructions Think Safety Important Safety InstructionsImportant Electrical Information Important Operation InstructionsThings To Know Step Assembly Pack Check List XE195Tools Console Mast Assembly Assembly Instructions XE195Handle BAR Assembly Connecting ARM Assembly Plastics Assembly Assembly Pack Check List XE295 #87 .5x12mm #105.M5 x 15mm Assembly Instructions XE295 Handle BAR Assembly Connecting ARM Assembly Plastics Assembly Features Adjustable foot pedals, and orthopedically correct footpadsTransportation Operation of Your Elliptical Basic information Quick StartEntering/Changing Settings Programming the consoleManual Preset Programs ProgramsWork Profile Work Profile Strength Work Profile CardioInterval Work Profile Programming Preset ProgramsCustom User Defined Programs Heart Rate programs Rate of Perceived Exertion Erratic Operation Using a Heart Rate TransmitterHeart Rate Control Program 1 & 2 HR 1, HR 2 operation Maintenance Menu in console software MaintenanceElliptical Warranty Manufacturer’s Limited Warranty

XE 195, XE 295 specifications

Spirit XE 295 and XE 195 represent the cutting edge in the realm of electric sailboats, merging innovation with sustainable sailing. These vessels are engineered to provide excellence on the water while minimizing environmental impact.

The Spirit XE 295 is designed for both performance and comfort, accommodating up to six passengers with spacious interiors and a well-thought-out layout. It features a robust hull made from advanced composite materials, ensuring durability and optimal hydrodynamics for cruising. The Energy Management System, a notable highlight of the XE 295, seamlessly integrates renewable energy solutions, allowing the vessel to harness solar power, thus contributing to its green credentials.

On the other hand, the Spirit XE 195 brings a dynamic sailing experience to the table, crafted for those who appreciate a more compact design. With the ability to comfortably host four guests, the XE 195 emphasizes a lightweight structure, making it highly responsive and maneuverable. Its sleek profile aids in enhancing speed without compromising stability.

Both models are equipped with cutting-edge electric propulsion systems. The high-efficiency electric motors are designed to provide powerful thrust with minimal noise, significantly elevating the sailing experience while adhering to eco-friendly principles. The regenerative sailing technology incorporated within these boats allows them to recharge the batteries using the energy generated while sailing, thus extending their range and capability.

Safety is paramount in these designs, with advanced navigation and monitoring systems that include automated sail controls and real-time data analysis of environmental conditions. Sailors can enjoy peace of mind knowing that these systems can help anticipate changes and assist in decision-making.

Another key feature is the customizable design options available for both models. Owners have the flexibility to choose finishes, interior layouts, and additional technology integrations that can adapt to their personal style and requirements.

In conclusion, the Spirit XE 295 and XE 195 stand out in the electric sailboat market through their commitment to performance, luxury, and sustainability. With their highly advanced technologies and user-centric designs, they represent a significant leap forward in what modern sailing can achieve, appealing to a new generation of environmentally conscious sailors.
Top Page Image Contents