Radio
A beat sound or noise is heard while receiving radio broadcast.
≥Confirm the antenna is properly connected. (l 8)
≥Adjust the position of the antenna.
≥Try to keep a certain amount of distance between the antenna and AC mains lead.
≥Try using an outdoor antenna if there are buildings or mountains nearby.
≥Switch the television or other audio player off or separate it from this system.
≥Keep this system away from mobile phones if the interference is apparent.
iPod/iPhone/iPad operations
Cannot charge or operate.
≥Have you selected the appropriate selector? Press [iPod/USB] to select either “IPOD_DOCK” or “IPOD_PORT”.
≥Check that the iPod/iPhone/iPad is connected properly. (l 9)
≥The battery of the iPod/iPhone/iPad is depleted. Charge the iPod/iPhone/iPad, and then operate again.
≥Connect the iPod/iPhone/iPad again or try to restart the iPod/ iPhone/iPad.
≥When this system is in standby mode, charging will not start when using the “IPOD_PORT” connection. Turn this system on and make sure the charging has started before switching this system to standby mode.
≥Charging an iPod/iPhone/iPad whose battery is depleted:
–When using the “IPOD_PORT” connection, turn this system on. Do not turn this system off until the iPod/ iPhone/iPad becomes operational.
–When using the “IPOD_DOCK” connection, “CHECKING CONNECTION” will be displayed until the iPod/iPhone becomes operational, but this system will have begun charging.
AirPlay operations
Cannot connect to the network.
≥Confirm the network connection and settings. (l 10)
≥Your wireless network might be set to be invisible. In this case select “Manual settings” in “Method 4”. (l 13)
≥This system cannot join a wireless network using WEP security settings with the WPS methods (“Method 1”). Use “Method 4” to join the wireless network. (l 12)
≥Make sure that the multicast function on the wireless network router is set to on (enabled).
≥When “D.CONNECT” is used, if the password for “D.CONNECT” has been changed connect the other device to this system using the new password. (l 14)
Cannot connect to this system.
≥Display the wireless network name that this system is connected to and make sure that the device is connected to the same network. (l 10, 22)
≥If “NET STNBY” is set to “OFF”, the AirPlay compatible device cannot be connected when this system is off.
≥Turn off the Wi-Fi setting on the AirPlay compatible device, set “NET STNBY” to “OFF” (l 22) and then turn this system off and on. Reconnect the compatible device to the Wi-Fi network and then select this system as the AirPlay speakers again.
24
24
My wireless network router is WPS PBC compatible, but the pairing does not work.
≥If the network is set to be invisible, the push button configuration does not work. In this case, either make the wireless network visible while you set up the network for this system or use “Method 2”, “Method 3” or “Method 4”.
(l 11, 12)
Playback does not start.
The sound is interrupted.
≥Simultaneous use with other 2.4 GHz devices, such as microwaves, cordless telephones, etc., may result in connection interruptions.
Increase the distance between this system and these devices.
≥Do not place this system inside a metal cabinet, for it might block the Wi-Fi signal.
≥Place this system closer to the wireless network router.
≥If “D.CONNECT” is set to “ON”, place the AirPlay compatible device closer to the speaker unit.
≥If several wireless devices are simultaneously using the same wireless network as this system, try turning off the other devices or reducing their wireless network usage.
≥If the playback stops, check the playback status on the iOS device or iTunes.
≥If play does not start (even though the Wi-Fi status indicator lights in blue and the AirPlay 
icon is displayed), restart the wireless network router, turn the Wi-Fi connection on the iOS device or Mac/PC off and on, and then make sure that your home wireless network is selected.
≥If the AirPlay 
icon is not displayed even if Wi-Fi status indicator lights in blue, try restarting the wireless network router.
≥With some iOS and iTunes versions, it may not be possible to restart the AirPlay playback if the selector is changed (e.g., “CD”) or this system is turned off, during the AirPlay playback.
In this case, select a different device from the AirPlay icon of the Music App or iTunes and then re-select this system as the output speakers. (l 14)
Remote control
The remote control doesn’t work properly.
≥The remote control and this system are using a different code. (l 25, “REMOTE ”)
≥Is the battery depleted or is the battery inserted incorrectly? (l 7)
Messages
The following messages or service numbers may appear on this system’s displays.
“--:--”
≥You plugged the AC mains lead in for the first time or there was a power failure recently. Set the time (l 20).
“ADJUST CLOCK”
≥Clock is not set. Adjust the clock accordingly.
“ADJUST TIMER”
≥Play timer is not set. Adjust the play timer accordingly.
“AUTO OFF”
≥This system has been left unused for about 30 minutes and will shut down within a minute. Press any button to cancel it.
