American Standard 9210.030.329 specs

NEWBERN VANITY SINK 7820.400 AND 7820.800

INSTALLATION onto VANITY

Two people recommended for this installation

Mount the drain assembly (not included) on the sink. Be certain to apply

a bead of sealing putty on the underside of the drain (Part "A") in order to ensure a watertight seal between the sink and drain. Remove excess putty after installing the drain on the sink.

Apply a bead of silicone adhesive to the rim of the vanity. Place the top centered left to right on the vanity and with the back edge of the top even with the rear of the vanity. Apply a bead of silicone along the top back edge of the vanity top and the wall. Clean up any excess silicone.

Connect the trap to the drain assembly hand tight to check alignment. It may be necessary to cut off part of the tailpiece (area "B") or part horizontal leg of the trap (area "C").

Connect hot and cold supply lines to the shut off valves.

Tighten trap joints for watertight assembly.

MARBLE TOP 9210.130.251 WITH RATTAN 0615 UNDERCOUNTER SINK

Two people recommended for this installation

NOTE: Marble top comes pre-cut for the Rattan Undercounter sink and 8"

faucet spread. Also it is strongly recommended that the marble top be sealed after installation and prior to use.

Mount the drain assembly (not included) on the sink. Be certain to apply a bead of sealing putty on the underside of the drain (Part "A") in order to ensure a watertight seal between the sink and drain. Remove excess putty after installing the drain on the sink.

Turn the marble top upside down and place it on a clean, scratch resistant surface. Apply a bead of silicone adhesive to the rim of the sink. Center the sink over the cutout and (secure it to the top using the mounting kit provided).

NOTE:

Use the 4 brackets supplied with the sink mounting kit

and the 4 screws supplied with the marble top to secure the sink to the underside of the marble top.

Turn the top right-side up and install the faucet per the manufacturer’s instructions.

Apply a bead of silicone adhesive to the rim of the vanity. Place the marble top centered left to right on the vanity and with the back edge of the top even with the rear of the vanity. Clean up any excess silicone.

Connect the trap to the drain assembly hand tight to check alignment. It may be necessary to cut off part of the tailpiece (area "A") or part horizontal leg of the trap (area "B").

Connect hot and cold supply lines to the shut off valves. Tighten trap joints for watertight assembly.

- 3 -	770011-100

9210.030.329 specifications

The American Standard 9210.030.329 is a beautifully designed bathroom faucet that blends modern aesthetics with functional innovation, making it an exceptional addition to any contemporary lavatory space. This particular model stands out for its sleek, streamlined design, which is both stylish and practical, allowing it to seamlessly integrate into various décor themes.

One of the main features of the American Standard 9210.030.329 faucet is its single-handle lever, which offers smooth and effortless adjustment of water temperature and flow. The ergonomic design of the handle ensures a comfortable grip, while also providing precision control for an enhanced user experience. The faucet is designed with user convenience in mind, allowing for easy operation even in busy household settings.

In terms of technology, this faucet incorporates advanced ceramic disc cartridges that help ensure a drip-free performance and longevity. These cartridges are known for their durability and resistance to sediment buildup, which prolongs the faucet's life and maintains consistent water flow. This technological feature is particularly appealing for homeowners looking for reliability in their fixtures.

Another noteworthy characteristic of the American Standard 9210.030.329 is its water-saving capabilities. It is designed to meet the strict efficiency standards set by the EPA, which helps conserve water while still delivering a strong and steady flow. This not only promotes sustainable practices but also reflects positively on water bills, making it a smart choice for environmentally-conscious consumers.

Furthermore, the faucet's finish is a highlight of its design, usually available in a polished chrome or brushed nickel option. These finishes not only enhance the visual appeal of the product but also provide excellent resistance against tarnishing and corrosion, ensuring that the faucet retains its beauty over time.

Installation of the American Standard 9210.030.329 is straightforward and user-friendly, making it accessible for DIY enthusiasts. It typically comes with everything needed for a hassle-free setup, such as mounting hardware and clear instructions.

In summary, the American Standard 9210.030.329 is a perfect fusion of style, technology, and functionality. With features like a single-handle lever, durable ceramic disc cartridges, water-saving efficiency, and elegant finishes, this bathroom faucet represents a reliable choice for anyone looking to upgrade their space. It embodies the brand's commitment to quality and innovation, making it a trustworthy option for modern homes.