American Standard 4205.100 Make Water Supply Connections, Install Weights, Test Installed Faucet

Page 2

2 MAKE WATER SUPPLY CONNECTIONS

Turn off hot and cold water supplies before beginning.

Connect FLEXIBLE SUPPLIES (1, 2) directly to wall supplies. Connection on fitting supplies are 3/8" compression. Connect left supply (Marked with a Red Stripe) to Hot

and right supply (Marked with Blue Stripe) to

2

Cold wall supply. Use adjustable wrench to

 

tighten connections. Do not over tighten.

1

Faucet supplies are 21" long from faucet base.

Note: If additional supply length is required, installer must purchase

additional parts separately.

HOT

COLD

Important: If SUPPLY HOSES (1, 2) are too long, loop as illustrated to avoid kinking.

3 INSTALL WEIGHTS

With HAND SPRAY (1) seated in SPRAY HOLDER (2), install WEIGHTS (4) onto HOSE (3) using two SCREWS (5). Locate the WEIGHTS (4) two feet (2') from the underside of the sink deck.

Tighten SCREWS (5) firmly.

2

1

24"

4 TEST INSTALLED FAUCET

 

 

 

 

3

Move HANDLE (1) down into "off"

With HANDLE (1) down in "off" position,

 

 

position.

 

pull HAND SPRAY (2) from FAUCET (5)

4

5

Turn on water supplies.

and disconnect HAND SPRAY (2). Be

Check connections for leaks.

careful not to lose WASHER (7). Pull

 

 

HOSE (3) (HOSE should pull

 

 

(See Section 5)

 

 

approximately 2 feet) and direct

 

 

 

 

 

 

6

8

open HOSE END (4) into sink.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

1

 

Operate handle up and down, in COLD and HOT positions,

 

 

 

 

to flush water lines thoroughly.

 

 

 

 

 

Place WASHER (7) into HOSE END (4) and

 

7

 

 

connect HAND SPRAY (2) to HOSE END (4).

 

 

 

Place HAND SPRAY (2) back into faucet.

 

3

 

5

Check HAND SPRAY (2) operation:

 

 

 

 

 

 

 

 

 

 

With faucet on push BUTTON (6) for a broad cleansing

 

 

 

 

spray. BUTTON (6) will lock into this position.

 

 

 

 

To unlock BUTTON (6), rotate BUTTON (6) left or right

 

 

 

 

using the TAB (8). Faucet will return to standard spray.

4

M968473 REV 1 . 4

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Installation Instructions Install Faucet with or Without Deck EscutcheonMake Water Supply Connections Install WeightsTest Installed Faucet Check Connections for Leaks ServiceHOT Limit Safety Stop Adjustment

4205.100 specifications

The American Standard 4205.100 is a versatile and highly functional bathroom sink faucet designed for modern spaces. Renowned for its blend of aesthetics, durability, and advanced technology, this faucet is a popular choice among homeowners and builders alike.

One of the main features of the American Standard 4205.100 is its sleek and contemporary design. The faucet is available in various finishes, including chrome, brushed nickel, and oil-rubbed bronze, allowing it to seamlessly integrate into different bathroom styles. Its single-handle operation not only adds to the minimalist look but also makes it easy to adjust water temperature and flow with one hand.

In terms of technology, the American Standard 4205.100 is equipped with a ceramic disc valve. This innovative feature ensures a tight seal and smooth operation, reducing the risk of leaks and providing long-lasting performance. The ceramic discs are engineered to withstand wear, making the faucet not only reliable but also low-maintenance, as homeowners won’t need to worry about frequent repairs or replacements.

Another characteristic that sets this faucet apart is its water-saving capabilities. The American Standard 4205.100 is designed to provide a steady flow rate while minimizing water consumption. This efficiency is achieved without sacrificing performance, allowing users to enjoy a satisfying washing experience while being environmentally conscious.

Installation is made straightforward with the American Standard 4205.100, as it is designed to fit a variety of sink configurations. With all necessary mounting hardware included, homeowners and contractors can complete the installation with relative ease.

Furthermore, this faucet has undergone rigorous testing to ensure compliance with industry standards, enhancing its reliability and performance. Its solid brass construction also adds an additional layer of durability, ensuring that it can withstand the rigors of daily use in busy households.

In summary, the American Standard 4205.100 faucet stands out for its modern design, advanced ceramic disc technology, water-saving features, and ease of installation. It is an ideal choice for those looking to enhance their bathroom's functionality without compromising on style. Whether for a renovation or new build, this faucet promises to deliver both quality and elegance to any bathroom setting.
Top Page Image Contents