American Standard 2112.014 dimensions Skyline Champion Round Front Toilet

SKYLINE CHAMPION® 4

ROUND FRONT TOILET

❏2112.014

•Vitreous china

•EverClean® surface inhibits the growth of stain and odor causing bacteria, mold and mildew on the surface

•Low-consumption (6.0 Lpf/1.6 gpf)

•Features Champion® 4 Flushing System performance platform

•4" non-adjustable, piston action Accelerator™ flush valve

•Round Front siphon action jetted bowl

•2-3/8" fully-glazed trapway

•Speed Connect® tank/bowl coupling system

•Chrome-plated trip lever

•Sweeping pier on bowl

•100% factory flush tested

•2 bolt caps

•10 year warranty

❏3110.016 Round Front Bowl

❏4077.014 Tank

Nominal Dimensions:

28-3/8" x 19-5/8" x 33-1/8" (721 x 498 x 841mm)

Fixture only, seat and supply by others

Compliance Certifications -

Meets or Exceeds the Following Specifications:

•ASME A112.19.2M for Vitreous China Fixtures - includes Flush Performance, Ball Pass

Diameter, Trap Seal Depth and all Dimensions

•Los Angeles Department of Water and Power Supplementary Purchase Specification for Non- Adjustability - July, 2003 revision

To Be Specified:

❏Color: 020 White

❏Seat: (please specify color)

❏Champion® Slow Close Round Front #5330.010

❏Rise & Shine Round Front #5322.011

❏Laurel Round Front #5308.014

❏Supply with stop:

© 2008 AS America Inc.

SKYLINE CHAMPION® 4

ROUND FRONT TOILET

VITREOUS CHINA

FINISHED WALL
	721mm
	(28-3/8)
32mm ± 6mm				498mm
(1-1/4 ± 1/4)				(19-5/8)
	235mm
	(9-1/4)
	419mm
	(16-1/2)
				356mm
	C/L OF SEAT POST HOLES			(14)
	140mm (5-1/2 CENTERS)
				841mm
			SUPPLY	(33-1/8)
			AS
83mm 1/4)-(3			REQ'D
		387mm
		(15-1/4)
			254mm
			(10)
	16mm		152mm
	(5/8)		(6)
264mm		FINISHED		254mm
	362mm	FLOOR
(10-3/8)				(10)
	(14-1/4)

305mm C/L OF OUTLET (12)

NOTES:

THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.

*DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided page

K31

Revised 2/08