American Standard 2902E installation instructions General Installation Information

SAVONA

ELITE CORNER™

HIGH GLOSS ACRYLIC SHOWN LESS ALL FITTINGS

2902E SERIES WHIRLPOOL

INSTALLATION INSTRUCTIONS

1492mm	TO PUMP FOR
-3/4)
	PROVIDE ACCESS	1067 mm
(58	SERVICING ON ALL		(42)
1588mm	INSTALLATIONS
	REMOVABLE BLANK
-1/2)	IN-LINE HEATER
(62
	ON/OFF		1765 mm
	SWITCH
			(69-1/2)
	102mm
	(4)

THANK YOU...

for selecting an American Standard bath. Your new bath is shipped to you after careful inspection. The whirlpool version is completely assembled with pump, motor, and system piping. All you need to finish the installation are your selected fittings and electrical connections for a whirlpool.

●RECOMMENDED FITTING LOCATION

64 X 330mm (2-1/2 X 13)

1067 mm
(42)
	203mm
	(8)
▲OUTLINE OF	C/L

CUTOUT 1-1/2 O.D. DRAIN

1048mm	OUTLET
(41-1/4)

2096mm (82-1/2)

CUTOUT

IN FLOOR

FOR

DRAIN

914mm

(36)

PUMP

To insure maximum performance and pleasure from this product, please follow the instructions and cautions.

List of Optional Components (not included):

• Flex-Jet Pulse Jet Kit*

• Flex-Jet Soft Jet Kit*

• E-Z-Install Heater*

51 mm	C/L OF	102mm
(2)	OVERFLOW	(4)
■ LEVELING		572 mm
		(22-1/2)
STRINGER
		521 mm
NOT FOR
		(20-1/2)
SUPPORT
INTEGRAL	44 mm	ROUGH
	(1-3/4)
FEET		FLOOR
	89 mm
	(3-1/2)
1-1/2 O.D. TAILPIECE		1-1/2 N.P.T.M.
		THREADS
GENERAL SPECIFICATIONS FOR 2902E WHIRLPOOL
INSTALLED SIZE	82-1/2 x 69-1/2 x 22-1/2 In.(2096 x 1765 x 572mm)
WEIGHT		144 Lbs. (65 Kg.)
WEIGHT w/WATER		803 Lbs. (361 Kg.)
GAL. TO OVERFLOW		79 Gal. (299 L)
WHIRLPOOL MIN. OPERATING VOL.		73 Gal. (277 L)
BATHING WELL AT SUMP		38 x 30 In. (965 x 762mm)
BATHING WELL AT RIM		58 x 55 In. (1473 x 1397mm)
WATER DEPTH TO OVERFLOW		15-3/4 In. (400mm)
FLOOR LOADING		33 Lbs./Sq.Ft. (165 Kgs./Sq.m)
(PROJECTED AREA)
PTS.		41.7
CUBE (FT3)		68.4
WHIRLPOOL ELECTRICAL SPECIFICATIONS
PUMP		2.1 HP, 14.4 AMPS, 120V.

GENERAL INSTALLATION INFORMATION

• Tile Bead Kit*

List of Required Components (not included):

•	Drain*	• Bath Filler*
* see your Home Depot Retailer
List of Required Tools and Supplies:
Tools		Supplies
•	Level	•	Nails
•	Tape Measure	•	Putty
•	Pipe Wrench	•	Caulking (waterproof)
•	Slip Joint Pliers	•	1 x 3 or 2 x 2
•	Screw Driver		Stringers
•	Standard	•	Drop Cloth
	Woodworking Tools	•	20 amp GFI
•	Personal Safety		Outlet
	Equipment	•	Cement, Plaster,
•	Caulking Gun		Grout

Carefully uncrate and inspect your new bath for any shipping damage. If such damage is found, report it to your vendor immediately.

After inspection and during installation, protect the bath from construction damage. After installation, and before enclosing with wallboard, tile, etc., water test the unit and check for leaks.

Do not make modifications to the whirlpool system or remove pump from factory mounting. This could adversely affect the safety and performance of the whirlpool and void the warranty. Do not handle or move the whirlpool by the pump, motor, or piping system.

Fittings (bath filler, shower arm, etc.) are not provided with the bath and must be ordered separately. Framing and enclosing materials are provided by others. Check for availability of optional American Standard wall tiling bead (required for recess installations).

Protect all finished surfaces of the whirlpool during construction and installation using a drop cloth.

WARNING! Do not lift whirlpool by the piping harness at any time.

FOR AFTER-SALES SERVICE CALL 1 (800) 442-1902 WEEKDAYS.

© American Standard Inc. 2003

752866-100 Rev. BAll product names listed herein are trademarks of American Standard Inc. unless otherwise noted.