American Standard 6054.XXX installation instructions Install Faucet

Page 1

	Installation
	Instructions
CLARIDGE	6054.XXX

Centerset Lavatory Faucet with the

Speed Connect™ Drain

Congratulations on purchasing your American Standard faucet with the Speed Connect Drain, a feature found only on

American Standard faucets. Speed Connect Drain*

•1/3 of the parts, installs in 1/3 of the time

•No tools needed

•Never needs adjustment

•Guaranteed to seal properly the first time, every time.

Certiﬁed to comply with ANSI A112.18.1

M 9 6 8 6 3 2

*Your new American Standard faucet is designed to work only with the Speed Connect drain. Helpful tips for removing your current drain can be found in the Troubleshooting section of these instructions.

To ensure that your installation proceeds smoothly-please read these instructions carefully before you begin.

Recommended tools

ScrewdriverChannel LocksAdjustable WrenchTubing Cutter

1			Turn off hot and cold water
	INSTALL FAUCET	CAUTION
			supplies before beginning.

Turn off hot and cold water supplies before beginning.

Insert FAUCET (1) and CABLE CONNECTOR (2) through mounting holes of Sink or mounting surface. Fig. A.

Assemble LOCKNUTS (3) onto SHANKS (4) ( from under side of Sink. Hand tighten ﬁrmly. Fig. B.

(HAND TIGHTEN)

Fig. A.

31

4

Fig. B.

POP-UP

CABLE

SINK OR

MOUNTING

SURFACE

3

2

2

1

Image 1

Contents Centerset Lavatory Faucet with Speed Connect Drain Install FaucetTurn off hot and cold water supplies before beginning Install Black Gasket Install POP-UP DrainInstall Gray Locknut POP-UP KnobCheck Operation of POP-UP Attach Cable ConnectorMake Water Supply and Waste Connections HotcoldService Test Installed FittingCheck Drain Connections 90˚If you need to remove the Stopper Troubleshooting GuideUnlocked Mode Locked Mode Vandal ProofFor Drains that are removed from above Sink For Drains that are removed from below Sink