![](/images/new-backgrounds/1032942/3294239x1.webp)
Tape Operation/Recording
English
IMPORTANT!
ÐBefore playing a tape, check and tighten slack tape with a pencil. Slack tape may get jammed or may burst in the mechanism.
Ð
ÐStore the tapes at room temperature and do not put them too close to a magnetic field (for example, a transformer,TV or speaker).
Tape playback
1Select TAPE source.
2Open the tape key flap marked ÒOPEN 2Ó on the front panel.
3Press STOP•OPENÇ0 to open the tape door.
4Insert a recorded tape and close the tape door. ● Load the tape with the open side downward and
the full spool to the left.
5Press PLAY 2 to start playback.
●The key is automatically released at the end of a tape, except if PAUSE; has been activated.
6To pause, press PAUSE;. Press again to resume.
7By pressing à or á on the system fast winding of tape is possible in both directions.
8To stop the tape, press STOP•OPENÇ0.
Note:
– The sound source cannot be changed while playing or recording a tape.
20