PYLE Audio FWM352 General Information, Supplied accessories, Acknowledgement, Safety information

This product complies with the radio interference requirements of the European Community.

Supplied accessories

Ð2 speaker boxes

Ðremote control

ÐMW loop antenna

ÐFM wire antenna

Acknowledgement

Energy Star

As an ENERGY STARR Partner, Philips has

determined that this product meets the ENERGY

STARR guidelines for energy efficiency.

Environmental information

All unnecessary packaging has been omitted.We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet).

Your system consists of materials which can be recycled and reused if disassembled by a specialised company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.

Disposal of your old product

Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.

When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC

Please inform yourself about the local separate collection system for electrical and electronic products.

Please act according to your local rules and do not dispose of your old products with your normal household waste.The correct disposal of your old product will help prevent potential negative consequences for the environment and human health.

Safety information

●Before operating the system, check that the operating voltage indicated on the typeplate (or the voltage indication beside the voltage selector) of your system is identical with the voltage of your local power supply. If not, please consult your dealer.

●Place the system on a flat, hard and stable surface.

●Place the system in a location with adequate ventilation to prevent internal heat build-up in your system. Allow at least 10 cm (4 inches) clearance from the rear and the top of the unit and 5 cm (2 inches) from each side.

●The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc.

●Do not expose the system, batteries or discs to excessive moisture, rain, sand or heat sources caused by heating equipment or direct sunlight.

●No naked flame sources, such as lighted candles, should be placed on the apparatus.

●No objects filled with liquids, such as vases, shall be placed on the apparatus.

●DonÕt expose the system to dripping or splashing.

●Install this unit near the AC outlet and where the AC power plug can be reached easily.

●The lens may cloud over when the system is suddenly moved from cold to warm surroundings, making it impossible to play a disc. Leave the system in the warm environment until the moisture evaporates.

●The mechanical parts of the set contain self- lubricating bearings and must not be oiled or lubricated.

●When the system is switched to Standby mode, it is still consuming some power. To disconnect the system from the power supply completely, remove the AC power plug from the wall socket.

English