PYLE Audio FWM352 user manual Troubleshooting, Problem, No Disc is displayed, Solution

Page 26

English

Troubleshooting

WARNING

Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock.

If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help.

Problem

“NO DISC” is displayed.

“DISC NOT FINALIZED” is displayed.

Radio reception is poor.

Recording or playback cannot be made.

The system does not react when buttons are pressed.

Sound cannot be heard or is of poor quality.

The left and right sound outputs are reversed.

Solution

✔Insert a disc.

✔Check if the disc is inserted upside down.

✔Wait until the moisture condensation at the lens has cleared.

✔Replace or clean the disc, see ÒMaintenanceÓ.

✔Use a finalized CD-RW or a correct MP3-CD format disc.

✔Use a finalised CD-RW or CD-R.

✔If the signal is too weak, adjust the antenna or connect an external antenna for better reception.

✔Increase the distance between the Mini HiFi System and your TV or VCR.

✔Clean deck parts, see ÒMaintenanceÓ.

✔Use only NORMAL (IEC I) tape.

✔Apply a piece of adhesive tape over the missing tab space.

✔Remove and reconnect the AC power plug and switch on the system again.

✔Adjust the volume.

✔Disconnect the headphones.

✔Check that the speakers are connec ted correctly.

✔Check if the stripped speaker wire is clamped.

✔Make sure the MP3-CD was recorded within 32-256 kbps bit rate with sampling frequencies at 48 kHz, 44.1 kHz or 32 kHz.

✔Check the speaker connections and location.

26

Image 26

Contents Mini Hi-Fi System Manual do usuárioMains plug How to connect a plugImportant notes for users in the U.K Copyright in the U.KTuner AUX Mute Repeat Program Shuffle VOL For tuner installation Italiano Nederlands Deutsch Dansk Svenska TuguêsrPo Suomi Contents General Information Supplied accessoriesSafety information AcknowledgementPreparations Optional connection Inserting batteries into the remote controlConnecting other equipment to your System FM AntennaControls on the system and remote control Controls Disc trayBasic Functions First time setup/power upTo reinstall Plug and Play To exit without storing the Plug and PlaySwitching the system to Eco Power Standby mode Demonstration mode Dim modeSwitching the system on Power-saving automatic standbyDSC Digital Sound Control Sound controlKaraoke DBB Dynamic Bass BoostAbout MP3 disc CD/MP3-CD OperationsDiscs for playback Loading discsSelecting a desired track/passage Playing discsReplacing discs during playback Selecting a desired Album/Title MP3 disc onlyErasing the programme Different play modes Shuffle and RepeatProgramming the disc tracks To review the programmeAutomatic Preset Programming Tuning to radio stationsStoring preset radio stations Radio ReceptionTo store the radio station to another preset number Tuning to preset radio stationsManual Preset Programming To exit manual preset modeFull spool to the left Press Play 2 to start playback Tape Operation/RecordingTape playback To pause, press PAUSE. Press again to resumeTo stop recording, press STOPOPENÇ0 Recording from the radioTo select and record a particular passage within a CD track Listening to external sources MaintenanceExternal Sources Timer setting Clock/TimerClock setting To exit without storing the settingPress and hold Sleep Timer ON/OFF on the remote control Sleep timer settingTo deactivate the Timer To activate the TimerSpecifications Solution TroubleshootingProblem No Disc is displayedTroubleshooting