Vanity Installation

Provide suitable reinforcement required for anchoring the vanity to the wall. Centerline of reinforcement should be 32- 1/2" up from the floor (see Figure 1).

Back legs are set inward from the rear of the vanity which allows the vanity to sit flush against the wall over most types of molding. If the vanity interferes with the molding, the molding needs to be notched to seat the vanity flush against the wall (see Figure 2).

Rough in supply lines and waste per rough in dimensions.

NOTE: If current supply lines are greater than 6" on center, they may interfere with cutout in rear of vanity or vanity shelf.

Remove the wood top from the vanity. The top is held in place from the underside by 4 screws, 1 through each of the 4 angled corner braces.

Move the vanity into place and level with the adjustable glides on the bottom of the feet. The glides can be adjusted outward up to 1" but it is recommended not to exceed 1/2" if possible. Anchor it to the wall through at least 2 of the anchoring holes in the rear of the vanity (see Figure 2).

Continue with installation appropriate for top and sink options chosen.

C/L of 2 x 6

Reinforcement

FIGURE 1	32-1/2"
	FIGURE 2

ADJUSTABLE GLIDES (LOCATED UNDER EACH FOOT)

Finished

Floor

21-1/2" 546mm

ANCHORING

HOLES

32-1/2" 826mm

MOLDING

Wood Top with Recommended Sinks...

Two people recommended for this installation

PAPER TEMPLATE

Determine which sink is being installed and follow the instructions printed on the appropriate template supplied with vanity.

NOTE: American Standard is not responsible for cut-out errors when the incorrect cut-out template is used.

If Installing:	Use Template:	WOOD VANITY TOP


Sebring 0573	730541-400	IMPORTANT: BE SURE TO CENTER SINK
Coventry 0575	730542-400
		CUT OUT HORIZONTALLY ON VANITY TOP.

After top is replaced, connect the trap to the drain assembly hand tight to check alignment. It may be necessary to cut off part of the tailpiece (area "A") or part horizontal leg of the trap (area "B").

Connect hot and cold supply lines to the shut off valves. Tighten trap joints for watertight assembly.

- 2 -

730545 - 100 Rev . C

9424.200 specifications

The American Standard 9424.200 is a sophisticated and expertly engineered toilet that represents the culmination of modern bathroom design and innovative technology. Known for its efficiency and performance, this model is a popular choice for both residential and commercial spaces that seek to combine functionality with aesthetic appeal.

One of the main features of the American Standard 9424.200 is its powerful flushing system, which utilizes the company’s patented EverClean surface technology. This special coating inhibits the growth of mold, mildew, and bacteria, ensuring that the toilet remains cleaner for longer, thus reducing the frequency of scrubbing and cleaning. The EverClean surface is not only a practical feature but also promotes a healthier bathroom environment.

The 9424.200 is designed using a high-efficiency, dual-flush system that allows users to choose between a full or partial flush, providing the flexibility to conserve water based on the waste being disposed of. This toilet has been certified by the Environmental Protection Agency’s WaterSense program, which recognizes plumbing fixtures that meet strict water-saving standards. With a water usage of 1.28 gallons per flush, the American Standard 9424.200 not only conserves water but also helps in reducing utility bills over time.

In terms of comfort, this model features an elongated bowl design that offers increased comfort compared to traditional round bowls. The added length provides more space, making it a preferred choice for many users. The height of the toilet is also optimized to accommodate users of all ages, making it easier for children and the elderly to sit down and stand up with ease.

Another notable characteristic of the American Standard 9424.200 is its sleek and modern design, which complements various bathroom decors. It can seamlessly blend into contemporary, classic, or transitional styles. The toilet is constructed with durable materials that enhance its longevity and resilience, ensuring that it withstands daily use while maintaining its visual appeal.

With a strong emphasis on quality, innovation, and sustainability, the American Standard 9424.200 remains a standout product in the market, making it a valuable addition to any bathroom. Its combination of advanced flushing technology, water efficiency, comfort features, and attractive design solidifies its reputation as a reliable and stylish choice. Overall, it is a testament to American Standard's commitment to delivering superior bathroom solutions for consumers worldwide.