Care and Cleaning of Vanity

Optional marble top 9424.495 with Ovalyn 0495.221 undermount sink…

Two people recommended for this installation

NOTE: Marble top comes pre-cut for the Ovalyn under counter mount sink and 8" faucet spread. Also, it is strongly recommended that the marble top be sealed after installation and prior to use.

Remove wood top if not already done.

Mount the drain assembly (not included) on the sink. Be certain to apply a bead of sealing putty on the underside of the drain (Part "A") in order to ensure a watertight seal between the sink and drain. Remove excess putty after installing the drain on the sink.

Turn the marble top upside down and place it on a clean, scratch resistant surface. Apply a bead of silicone adhesive to the rim of the sink. Center the sink over the cutout and (secure it to the top using the mounting kit provided).

NOTE: Brass inserts are preinstalled on the underside of the marble top. Use the 4 brackets supplied with the sink mounting kit and the 4 screws supplied with the marble top.

Turn the top right-side up and install the faucet per the manufacturer’s instructions.

Apply a bead of silicone adhesive to the rim of the vanity. Place the marble top centered left to right on the vanity and with the back edge of the top even with the rear of the vanity. Clean up any excess silicone.

Connect the trap to the drain assembly hand tight to check alignment. It may be necessary to cut off part of the tailpiece (area "A") or part horizontal leg of the trap (area "B").

Connect hot and cold supply lines to the shut off valves. Tighten trap joints for watertight assembly.

Dust the vanity frequently with a clean, soft, dry, lint-free cloth, as well as polish it on a regular basis. Clean the surface by rubbing in the direction of the grain. Use polishes that contain detergents, emulsifiers and mineral oil. Avoid using silicone cleaners and waxes.

Clean up excess water and spills immediately. Use a blotting rather than a wiping action. Water left over a long period of time will cause white spots in the finish.

NOTE: Please note that some chemicals may damage the finish. Take care to avoid the following: iodine, hair dye, after shave lotion, shaving cream, alcohol, perfume, Lestoil® , Lysol Tub and Tile Cleaner® , Lysol Spray Disinfectant® , Dow Disinfectant® , acetone, paint remover, Formula 409® , Tile-X® , and Nair® .

Care and Cleaning of the Marble Vanity Top

Marble is porous and easily stained. Wipe off anything spilled on it immediately. It should be washed or cleaned regularly with fresh warm water and a non-abrasive clean cloth. Also, using a non-abrasive, neutral (pH balanced) cleaner will help remove dirt and grime, but it is recommended to first try warm water only.

Marble should be sealed regularly with a good quality marble sealer. Marble sealers are available at most retail home supply stores. Follow the instructions on the sealer container for proper application and frequency of use. The sealer acts as a stain inhibitor and prevents most stains and soil from being absorbed into the porous surface, but it is NOT a guarantee against staining. All spills should be cleaned immediately. Avoid contact with all oils and petroleum-based products. Also, avoid contact with all acid or caustic products such as vinegar, citrus or fruit juices, soda, chlorine, and nail polish remover. If the marble is well sealed, the warm water and non-abrasive cloth should keep it clean.

- 3 -

730545 - 100 Rev . C

9424.200 specifications

The American Standard 9424.200 is a sophisticated and expertly engineered toilet that represents the culmination of modern bathroom design and innovative technology. Known for its efficiency and performance, this model is a popular choice for both residential and commercial spaces that seek to combine functionality with aesthetic appeal.

One of the main features of the American Standard 9424.200 is its powerful flushing system, which utilizes the company’s patented EverClean surface technology. This special coating inhibits the growth of mold, mildew, and bacteria, ensuring that the toilet remains cleaner for longer, thus reducing the frequency of scrubbing and cleaning. The EverClean surface is not only a practical feature but also promotes a healthier bathroom environment.

The 9424.200 is designed using a high-efficiency, dual-flush system that allows users to choose between a full or partial flush, providing the flexibility to conserve water based on the waste being disposed of. This toilet has been certified by the Environmental Protection Agency’s WaterSense program, which recognizes plumbing fixtures that meet strict water-saving standards. With a water usage of 1.28 gallons per flush, the American Standard 9424.200 not only conserves water but also helps in reducing utility bills over time.

In terms of comfort, this model features an elongated bowl design that offers increased comfort compared to traditional round bowls. The added length provides more space, making it a preferred choice for many users. The height of the toilet is also optimized to accommodate users of all ages, making it easier for children and the elderly to sit down and stand up with ease.

Another notable characteristic of the American Standard 9424.200 is its sleek and modern design, which complements various bathroom decors. It can seamlessly blend into contemporary, classic, or transitional styles. The toilet is constructed with durable materials that enhance its longevity and resilience, ensuring that it withstands daily use while maintaining its visual appeal.

With a strong emphasis on quality, innovation, and sustainability, the American Standard 9424.200 remains a standout product in the market, making it a valuable addition to any bathroom. Its combination of advanced flushing technology, water efficiency, comfort features, and attractive design solidifies its reputation as a reliable and stylish choice. Overall, it is a testament to American Standard's commitment to delivering superior bathroom solutions for consumers worldwide.