TEMPERATURE CONTROLS - INFORMATION
Do not push the ON/OFF button on the Master controller after transferring priority of temperature selection to a Secondary controller as the system will shut down.
Do Not Turn OFF
the Master
Controller
Temperature priority can not be switched to another controller when the water is flowing through the water heater.
|
|
|
|
|
|
| 400C |
|
|
Controller 1 |
|
| Controller 2 | |
|
| |||
in use |
|
| cannot take | |
|
|
|
| priority |
If a temperature 500C or higher has been selected on a controller and priority of tem- perature selection is transferred to another controller, then back again, the temperature on the controller will automatically drop to 50(or 42)ºC. If the set point is 50(or 42)0C or less it will not alter. This is a safety feature.
First | Another | First |
Controller | Controller | Controller |
Depending on the weather conditions and the length of the pipe between the heater and the tap in use, there may be a variation between the temperature dis- played at the controller and the tempera- ture at the tap.
Do not clean the control with solvents or detergents. Use only a soft damp cloth.
480C
14