Normal Heater Operation, Temperature Control

Normal Heater Operation

•Press the Heat ON / OFF button.

•The ON/Combustion indicator illuminates green, and the convection motor starts pre-purging.

•The Digital Display displays the present room temperature. After approximately 3 seconds, the electrode starts discharging electricity, and at the same time, the solenoid valves and the modulating valve open. After ignition, while the main burner is on “High”, the ON/Combustion indicator illuminates red when the thermocouple detects the flame, and electrical discharge ceases. (Forced combustion is carried out for approx. 60 sec on High).

•The PCB’s micro-computer regulates the room temperature and combustion time, and also con- trols both using fuzzy logic until the preset room temperature is reached.

Temperature Control

• Room temperature can be adjusted as desired with the Temp / Time buttons.

Turning OFF the Heater

•Press the Heat ON / OFF button.

•The solenoids and modulating valve close and combustion ceases.

•The indicators will go out. (The digital display will show the present time.)

•The convection motor stops after post-purging (2~4 minutes).

Child Lock

•Press the Up and Down buttons simultaneously. The Child Lock indicator will illuminate.

•When setting the lock while heater is operating, only the Heat ON/OFF button responds. When unit is off, the Heater ON /OFF button will not respond. (The Air Purifier can be operated.)

•The Up and Down buttons should be pressed simultaneously for approximately 2 seconds to cancel the Child Lock.

Clock Setting

•Press the Set Times button once. The Clock indicator will flash.

•Press the Temp/Time buttons to adjust the time.

•Press the Set Times button five times to set the clock. The indicator will go out.

Setting Timers 1 and 2 (Heater)

•Press the Set Times button twice. Timer 1 “on” indicator will flash.

•Press the Temp/Time buttons to adjust to the starting time.

•Press the Set Times button again. The Timer 1 “off” indicator will flash.

•Press the Temp/Time buttons to adjust to the finishing time.

•Press the Set Times button three times to lock in the programmed times. The Digital Display will show the current time. (The Timers can also be set during heater operation. In this instance, combustion will cease and the Timer will go into stand-by mode. When in stand-by mode, the set room temperature for the Timers cannot be modified. In order to modify the set room temperature, revert the unit to its normal state, modify the set room temperature and press the Timer button to complete setting.)

•The intelligent function will start the unit so that the room is warm at the set time.

•The Timer operates for the set time then automatically stops. (The Timer indicator starts flashing 5 minutes before the unit ceases operation and continues to flash after operation has ceased.)

•If the same button is pressed twice when the Timer is in stand-by mode, the unit will go into normal OFF mode.

Convector 460/560PTR

- 16 -

©Rinnai

RCE-560PTR specifications

The Rinnai RCE-560PTR is a leading model in the realm of energy-efficient water heating solutions, designed to meet the demands of modern households while providing exceptional performance. This innovative unit showcases a blend of advanced technology, user-friendly features, and durable construction, making it a top choice for both residential and commercial applications.

One of the hallmark features of the Rinnai RCE-560PTR is its tankless water heating capability. Unlike traditional water heaters that store hot water in a tank, this model heats water on demand, ensuring a continuous supply without the limitations of tank storage. This results in not only endless hot water but also enhanced energy efficiency, as the unit only operates when hot water is required. Consequently, users can experience significant energy savings and reduced utility bills.

The RCE-560PTR also incorporates Rinnai’s advanced technology, specifically the Circ-Logic system. This feature allows for the customization of recirculation patterns, facilitating faster water delivery and reducing wait times at the tap. Additionally, the unit is equipped with a built-in Wi-Fi module, enabling users to monitor and manage their water heating system remotely through a smartphone app. This level of connectivity ensures that households can maintain optimal performance and energy efficiency effortlessly.

Safety is a critical consideration in the Rinnai RCE-560PTR's design. The unit includes multiple safety features, such as an integrated temperature lock and a safety shut-off system, providing peace of mind to users. Furthermore, its durable construction features a stainless steel heat exchanger, ensuring longevity and resistance to corrosion, which contributes to the overall reliability of the product.

With an impressive flow rate, the RCE-560PTR can deliver up to 5.6 gallons per minute, making it suitable for larger homes or those with higher hot water demands. This feature, combined with its compact and sleek design, allows for flexible installation in various settings, from utility rooms to closets.

In summary, the Rinnai RCE-560PTR stands out in the market for its efficient tankless water heating technology, integrated smart features, safety-oriented design, and reliable performance. It represents a forward-thinking solution for consumers seeking to embrace sustainability while enjoying the comforts of modern living. With its combination of innovation and practicality, the RCE-560PTR is poised to redefine the future of water heating for homes and businesses alike.