Jabra 9450 user manual Conference Call with Multiple Headsets, Recording Desk Phone Calls

Merge an Incoming Call with a Current Call

Desk phone Softphone

1.While on a desk phone call, tap the softphone button to accept the incoming call. The desk phone call will be placed on hold.

2.Simultaneously press and hold the desk phone and softphone buttons on the base for 1-3 sec- onds to merge the calls. When calls are merged, the group call indicator will change to green.

1.While on softphone call, tap the desk phone button to accept the incoming call. The softphone call will be placed on hold.

2.Simultaneously press and hold the desk

phone and softphone buttons on the base for 1-3 seconds to merge the calls. When calls are merged, the group call indicator will change to green.

Unmerge/re-merge Calls

To unmerge or re-merge calls, simultaneously press and hold the desk phone and softphone buttons on the base keypad for 1-3 seconds.

End Group Call

To end a selected call in the group call, tap the relevant desk phone or softphone button on the base keypad. The group call will be ended for that participant.

To end the group call for all participants, dock the headset or tap the multi-function button.

7.4CONFERENCE CALL WITH MULTIPLE HEADSETS

The Jabra PRO 9450 enables up to three additional Jabra PRO headsets to be connected to the base for conferencing. When two or more additional headsets are connected to the base, the audio is filtered from wideband to narrowband.

Connect Additional Headset(s)

1.While the primary headset is undocked and on a call, dock a secondary headset with the base hosting the call. Pairing will take a few seconds, during which the docking indicator will blink yellow. When the headsets are successfully paired, a double-tone will sound in the primary headset.

2.Tap the multi-function button on the primary headset to accept the secondary headset. The audio is now shared between headsets.

3.Repeat the procedure to connect additional headsets, as required.

Ending or Leaving the Conference

The primary headset user can end the conference by hanging up the call. The call is ended for all headsets.

Guests can leave the conference by tapping the multi-function button on their headset, or by docking the head- set with the base. The conference call is still active for all other headsets.

7.5AUTOMATIC DISCONNECT PREVENTION (UNSUPPORTED SOFTPHONES)

When on a call using an unsupported softphone, any incoming calls on a desk phone will automatically disconnect the softphone call. To prevent disconnection, double-tap the softphone button on the base keypad before making the softphone call.

7.6RECORDING DESK PHONE CALLS

Desk phone calls can be recorded on a PC using third-party software, such as Windows Sound Recorder. To record a desk phone call, call recording must be enabled in Jabra Control Center.

Enable Call Recording

1.Launch Jabra Control Center, and select the ´Audio´ tab.

2.Tick ´Forward desk phone call to PC for recording´, and click ´Apply´.

Desk phone calls can now be recorded using any third-party software on a PC.

NOTE: Recording conversations in secrecy may be illegal. Never record conversations without first obtaining permission.

JABRA PRO 9450

25