Premier Mounts XUT-2637 Concrete Mounting, Display Bracket Installation, Final Installation

Page 2

Continued from front page

7.With the help of an assistant, position the wall plate against the wall and line up the mounting slots with drilled holes.

8.For each location, insert a lag bolt and washer into the wall.

9.Tighten each bolt with an open ended socket wrench by turning clockwise until tight.

WARNING: Do NOT over-tighten lag bolts when attaching the mount to the wall. Improper installation may result in personal injury or damage to property.

CAUTION: Do not release the wall plate until it is properly mounted and secured to the wall.

Concrete Mounting

NOTE: Concrete anchors must be used for concrete installation. They can be purchased at your local hardware store.

1.Begin by placing the wall plate into position against the wall, using the level (supplied) to keep it level.

2.Mark off six holes to be used for securing the mount and place the wall plate aside.

3.Next, drill holes using an electric drill and masonry bit.

4.Insert a concrete anchor into each hole.

5.If necessary, a hammer can be used to lightly tap each anchor into place so that they are flush with the wall.

6.Once all of the anchors are in place, move the wall plate back into position.

7.Attach the nut onto the threaded shaft that is protruding from the wall.

8.Do not tighten until all nuts are in place.

How to Determine Thread Depth

Display Bracket Installation

1.To ensure optimal installation, this kit includes various screws of different diameters and lengths.

2.Place your flat panel screen down on a soft, flat surface, and locate the threaded mounting points that are located on the back of the display.

3.Determine which screw is the correct length by carefully inserting a straw, or toothpick, and mark how deep the mounting point is.

4.If your display has a curved back or a recessed thread mounting point, a spacer must be used.

NOTE: Select the spacer that is closest in depth to the recess to keep your bracket as close to the display as possible.

5.Place the spacer between the mounting bracket and the display.

6.If a smaller screw is being used (M4, M5, or M6) please use a universal washer with each screw for added stability.

7.Attach each bracket to the display by aligning the holes on each bracket, with the threaded inserts on the back panel of your display, inserting the screws through both and turning clockwise until they are fully inserted.

8.Tighten with a Phillips head screw driver.

Final Installation

CAUTION: Two people are required for this step.

WARNING: MAKE SURE THE LOCKING SCREW IS FLUSH WITH THE LOCKING SCREW TAB BEFORE INSTALLATION.

1.To complete the installation of your new plasma mount, carefully place the flat panel brackets over the upper and lower mounting lips.

2.Use a Phillips head screwdriver to tighten the two (2) security screws (see inset below).

Upper Mounting Lip

Lower Mounting Lip

Locking Screw

Screwdriver

Progressive Marketing Products, Inc.

NORTH AMERICA

EUROPE

3130 E. Miraloma Ave.

Swallow House,

Anaheim, CA 92806

Shilton Industrial Estate,

800-368-9700

Shilton, Coventry, England

victory@mounts.com

CV79JY

 

Phone: +44(0)2476614700

 

Fax: +44(0)2476614710

Page 1 Page 2
Image 2
Page 1 Page 2
Contents Wood Stud Mounting Victory Tilt Screen Wall Mounting SystemIncluded Hardware Concrete Mounting Display Bracket InstallationFinal Installation

XUT-2637 specifications

Premier Mounts XUT-2637 is a versatile and innovative mount designed to enhance the installation and functionality of your digital displays. This exceptional model provides a seamless solution for various environments, whether in commercial spaces, educational institutions, or public venues. Its robust design and advanced features ensure that your displays are secure while maintaining an aesthetically pleasing appearance.

One of the primary features of the XUT-2637 is its universal compatibility, allowing it to accommodate a wide range of display sizes and brands. This flexibility makes it an ideal choice for any installation scenario. Additionally, it can support displays weighing up to 175 pounds, ensuring a sturdy and reliable setup. Its adaptability extends to VESA mounting patterns, covering many options that are essential for modern screen configurations.

The XUT-2637 is designed with ease of installation in mind. It includes a complete hardware kit that enables straightforward assembly and setup. The mount features a tilt function, allowing users to adjust the angle of the display for optimal viewing experience while reducing glare. This feature is especially beneficial in environments with varying ambient light conditions.

Another impressive aspect of the Premier Mounts XUT-2637 is its cable management system. This built-in solution neatly organizes and conceals cables, promoting a tidy installation that enhances the overall look of your display area. By avoiding cable clutter, users can maintain a professional and polished appearance in any setting.

Durability is a hallmark of the XUT-2637. Constructed from high-quality materials, this mount is engineered to withstand the rigors of daily use. Its finish not only adds to the aesthetic appeal but also provides resistance to scratches and wear, ensuring it remains visually appealing over time.

The mount also offers various mounting options, including a wall mount for easy installation in both landscape and portrait orientations. This flexibility allows for creative display arrangements, enabling users to optimize their visual presentations according to their specific needs.

In summary, the Premier Mounts XUT-2637 combines advanced engineering, versatile compatibility, and user-friendly features to deliver a top-notch mounting solution for digital displays. Whether in a bustling office, dynamic classroom, or engaging public space, this mount enhances functionality and visual appeal, making it an ideal choice for modern display setups.
Top Page Image Contents