Stovax 7118 manual Fitting & Removal of Firebricks, Fitting a NEW Door Glass

Page 11

MAINTENANCE and SERVICING

6.6It is important to remove and clean the baffle system to ensure the flue ways are clear of soot and debris and to ensure the safe and efficient operation of the stove. The frequency of cleaning will depend on the stove operating conditions.

6.7The baffle system is designed to give safe and efficient operation of the stove. Replace any damaged baffles immediately.

6.8Do not modify the baffle system.

7.FITTING & REMOVAL OF FIREBRICKS

7.1As part of the routine maintenance of the stove you may have to remove the firebricks from the stove. This can be carried-out without the use of tools, but the bricks must be removed and replaced as shown, after removing the baffle system.

7.2Allow the stove to cool fully before removing firebricks.

7.3If your stove is fitted with 4 upper firebricks, remove the lower 2 bricks first. Then lower the top bricks and remove.

PR7211

7.4Replace the bricks in the reverse order of removal.

7.5Care should be taken when handling bricks, as they can become fragile after a period of use. This is normal and the life will depend on the type of fuels burnt and the level of use. Damaged bricks should be replaced as soon as possible, and can be purchased from your Stovax dealer.

8.FITTING A NEW DOOR GLASS

8.1To maintain the safe use of your stove you may need to replace a damaged door glass. To complete this operation, use this method.

8.2Remove the door, by opening and lifting the door free of the hinge blocks. Then lie the door face down on a soft flat surface, to protect the paintwork and glass.

Single Door

Fixing Screws (x4)

Fixing Clips (x4)

Glass

Glass Seal

Door

PR7080

Double Door

Fixing Screws (x10)

Fixing Clips (x4)

Fixing Clip Long (x2)

Glass (x2)

Glass Seal (3mm)

Door (x2)

PR7081

8.3Using a screwdriver remove the glass clip fixing screws (4). The old glass can then be lifted clear of the door. (Note how the 3mm sealing rope is placed between the glass and the door.) Remember to dispose of the old glass safely.

8.4Clean, and re-paint, the rear of the door if required. Clean the screws with light oil and coat with high temperature anti-seize grease, this will aid future removal.

8.5Fit a new sealing rope between the new glass and the door, and place the glass into position in the door. Place the glass fixing clips into position and re-fix with the clean fixing screws, tighten the screws evenly until the clips hold the glass. Do not over tighten the clips as this could break the glass.

11

Image 11
Contents Stockton 3/4/5/6/7/8/11 Commissioning Checks to be completed and signed Installation EngineerStovax dealer appliance was purchased from Essential Information Must be completedStockton 3, 4, 5, 6, 7, 8 Installation Instructions for full fitting detailsGeneral StoveWith or without multifuel kit fitted Using the Stove for the First TimeBurning Wood ASH Removal OVER-FIRINGSeasonal use Burning performance Recommended FuelsThis occurs as a result of four possible causes TroubleshootingFlue draught Weather conditionsStove is Producing TAR Do not use abrasive cleaner or cleaning pads General CleaningCleaning Glass Annual ServiceFitting and Removal of Baffle Removal of the LOG GuardReplace the bricks in the reverse order of removal Fitting & Removal of FirebricksFitting a NEW Door Glass Double Door Seal 14mm Seal 10mm x 2mm Adjusting Door HingesFitting a new door seal Single Door Seal 14mmPage Page Description

7118 specifications

The Stovax 7118 is a distinguished model in the realm of wood-burning stoves, designed to deliver both functionality and aesthetic appeal for modern homes. Its elegant appearance and robust construction make it a favored choice among consumers seeking efficient heating solutions.

One of the standout features of the Stovax 7118 is its impressive heating capacity, making it suitable for medium to large spaces. With a nominal output of approximately 5-8 kW, this stove can effectively warm up to 150 square meters, ensuring that your living area remains cozy even during the coldest months.

The design of the Stovax 7118 underscores its contemporary style while incorporating traditional elements. Its clean lines and minimalist finish allow it to blend seamlessly into various interior settings. Available in multiple finishes, including classic black and sleek metallic options, homeowners can customize the stove to match their décor preferences.

An essential technology integral to the Stovax 7118 is its efficient combustion system. This model employs a secondary air supply that helps to enhance the burn rate of the wood, allowing for more complete combustion. This not only improves efficiency but also reduces emissions, making the stove an environmentally-friendly option. The inclusion of a riddling grate allows for easy ash management, complementing the overall user-friendly design.

Another significant characteristic of the Stovax 7118 is its large panoramic glass door, which offers an unobstructed view of the fire. This feature is particularly appealing, creating a warm inviting atmosphere while allowing users to enjoy the flickering flames. The airwash system incorporated in the design also keeps the glass clean, providing an uninterrupted view of the fire and minimizing maintenance.

Safety is a paramount consideration in the design of the Stovax 7118. It features a robust construction with heat-resistant materials, ensuring user safety during operation. Additionally, the stove is designed for easy installation with flexibility in flue options, accommodating an array of home configurations.

In conclusion, the Stovax 7118 exemplifies the perfect blend of efficiency, style, and practicality. With its advanced heating technology, striking design, and user-friendly features, it stands out as an excellent choice for anyone looking to elevate their home heating experience. Whether you are heating a cozy cabin or a modern home, the Stovax 7118 is a stove that promises warmth, beauty, and reliability.