Closure Plate Installation

INSTALLATION INSTRUCTIONS

INSTALLATION

3.6The flue system may now be connected to the stove. Ensure that all joints are sealed with a suitable fire resistant sealant. It is also recommended that a physical retention method be used at the flue spigot joint, self-tapping screws being favoured.

3.7Connect a suitable pressure gauge to the test point located on the inlet fitting, and turn the gas supply on. Light the appliance and check all gas joints for gas soundness. Turn the appliance to maximum and check that the supply pressure is as stated on the databadge. Turn the gas off and replace the test point screw. Turn the gas on and check the test point for gas soundness.

NOTE: The stove is also suitable for installation onto a fireplace opening. The following method illustrates how this can be achieved with the aid of the optional closure plate and spigot extension. Ensure the fireplace dimensions are as shown in diagram 2.

3.8Place the closure plate against the fireplace opening and ensure that there is sufficient overlap around the perimeter to allow a fume tight seal to be made. Cut straight across the top of the plate if trimming is required.

3.9Seal the plate to the opening and the hearth with a suitable heat resisting material. Ensure that any relief opening at the bottom of the plate is left unobstructed.

3.10Secure the spigot extension to the engine assembly and seal with heat resisting tape or similar. Position the engine assembly ensuring that the 50mm rear clearance is maintained, then proceed with the installation as detailed in points 3.2 to 3.7 above. See diagram 2.

AR0377

4. HANDLING & DISPOSAL OF FIRE CERAMICS

The fuel effect and side panels in this appliance are made from Refractory Ceramic Fibre (RCF), a material which is commonly used for this application.

Protective clothing is not required when handling these articles, but we recommend you follow normal hygiene rules of not smoking, eating or drinking in the work area and always wash your hands before eating or drinking.

To ensure that the release of RCF fibres are kept to a minimum, during installation and servicing a HEPA filtered vacuum is recommended to remove any dust accumulated

in and around the appliance before and after working on it. When servicing the appliance it is recommended that the replaced items are not broken up, but are sealed within heavy duty polythene bags and labelled as RCF waste.

RCF waste is classed as stable, non-reactive hazardous waste and may be disposed of at a licensed landfill site.

Excessive exposure to these materials may cause temporary irritation to eyes, skin and respiratory tract; wash hands thoroughly after handling the material.

5. FUELBED ARRANGEMENTS

Remove the cast iron door using the tool provided. The main ceramic components are inside the firebox.

NOTE: THE CAST IRON DOOR IS HEAVY, TAKE EXTREME CARE WHEN HANDLING TO AVOID DAMAGING THE OUTER CASING.

The fuel bed consists of 5 logs and 2 ash panels. The logs have letters A,B,C,D and E moulded into them for identification.

5.1Take the rear log A and place it up against the rear of the fire sitting on the two flat ledges of the burner. The two legs of the log should sit between the rear burner ports. See diagram 3. Ensure an equal gap between each side of the log and the side of the firebox.

AR1610

5.2Place log B on the left-hand side of the burner with the location bar on the underside of the log fully located in the long slot of the burner. Make sure the log is as far to the left as possible. See diagram 4.

AR1611

Stove Range specifications

Stovax has established itself as a leader in the stove market, renowned for its innovative technologies and commitment to quality. The Stovax Stove Range offers a diverse selection of wood-burning and multi-fuel stoves that combine functionality with aesthetic appeal, ensuring warmth and comfort in any home.

One of the standout features of the Stovax Stove Range is its efficient burning technology. Many models are equipped with advanced air wash systems that keep the glass clean, providing an unobstructed view of the flames while maximizing heat output. This technology not only enhances performance but also ensures that your stove operates with reduced emissions, complying with the stringent environmental standards that consumers demand today.

The Stovax range includes a variety of styles and sizes, catering to both contemporary and traditional interiors. From sleek, modern designs to classic, Victorian-inspired stoves, there is a perfect model for every taste and home décor. The customizable options ensure that the stoves can complement existing furnishings or serve as a stunning focal point in any room.

Another significant characteristic of the Stovax Stove Range is its robust construction. Each stove is crafted from high-quality materials, ensuring durability and longevity. The cast iron bodies provide excellent heat retention, so the warmth radiates even after the fire has dwindled, making these stoves not only beautiful but also practical.

Moreover, many of the Stovax stoves come with the option of a contemporary or traditional log store, enhancing both storage and design aesthetics. The easily accessible storage compartment allows for convenient firewood management, ensuring you can keep the home toasty without the hassle of frequent trips outside.

Stovax also offers a range of accessories and enhancements, including flue systems and chimney liners, ensuring a seamless installation and optimal performance tailored to your specific home requirements. This attention to detail exemplifies Stovax's dedication to customer satisfaction.

In summary, the Stovax Stove Range delivers on multiple fronts, combining advanced technology, aesthetic versatility, robust construction, and thoughtful features. A Stovax stove not only promises warmth but also elevates the charm and elegance of your living space, making it a worthwhile investment for any homeowner seeking comfort and style.