Stovax Stove Range manual User Instructions, General, Lighting the Stove

Page 4

USER INSTRUCTIONS

1.GENERAL

1.1Installation and servicing must be carried out by a competent person in accordance with Gas Safety (Installation and Use) Regulations 1998, the relevant British Standards for Installation, appropriate Codes of Practice and in accordance with the manufacturer’s instructions. It is recommended that a CORGI registered engineer be used for this purpose as they are approved by the HSE under the above regulations.

1.2This appliance is suitable for use in G.B. and I.E. using Natural Gas at a supply pressure of 20mbar or LPG at a supply pressure of 29mbar (Butane) or 37mbar (Propane).

1.3The installation shall also be completed in accordance with:

The Building Regulations issued by The Department of The Environment.

The Building Standards (Scotland) Regulations issued by the Scottish Development Department. For Republic of Ireland, reference should be made to the relevant standards governing installations (IS813:1996)

1.4Read all these Instructions before commencing installation.

1.5This appliance must be installed in accordance with the rules in force and only used in a sufficiently ventilated space.

1.6Ensure that curtains are not positioned above the stove, and that there is at least a clearance of 300mm between the sides of the stove and any curtains.

1.7The manufacturer considers the full outer casing of this stove to be a working surface. Therefore it will become hot whilst in operation. A suitable guard is recommended to protect young children, the aged and the infirm.

1.8This stove must only be operated with the door secured firmly in position. If any cracks appear in the glass the appliance must not be used until the glass panel is replaced.

1.9Do not attempt to burn rubbish in this stove.

1.10Any combustible shelves or surrounding furniture must only be fitted in accordance with the minimum dimensions detailed in Diagram 1.

1

AR0522

1.11Contact a competent service engineer to carry out relevant spillage checks etc. following home improvements carried out after installation of this stove (e.g. the fitting of double glazing).

1.12In all correspondence, please quote the appliance type and Serial Number which can be found on the databadge at the rear of the stove.

1.13This product is guaranteed for 2 years from the date of installation, as set out in the terms and conditions of sale between Gazco and your local Gazco dealer. Please consult

with your local Gazco dealer if you have any questions. In all correspondence always quote the Model No. and Serial No. Please ensure the commissioning checklist is completed by your installer, as this is a requirement of your Guarantee.

2.LIGHTING THE STOVE

2.1Locate the control valve on the appliance. There are two control knobs on the valve, the right-hand knob controls the pilot ignition and the left-hand knob controls the main burner.

2.2If your appliance has already been upgraded to battery remote control, please refer to the instructions provided with the upgrade to operate the remote control. The following instructions will work for either situation.

2

AR0914

2.3Ensure that the left-hand control knob is pointing to off ( )

2.4Ensure that the right-hand control knob is pointing to off ( ).

2.5Press in the right-hand control knob and rotate it anticlockwise until a click is heard (keep pressing in) and the knob is pointing to pilot ( ). The pilot should now light. If the pilot has not lit, repeat the procedure until it does.

2.6Keep the control knob pressed in for 10 seconds and then release it, the pilot should stay alight. If the pilot goes out, repeat the procedure until does.

2.7If the pilot will not light after repeated attempts, contact the retailer or installer from whom the appliance was purchased.

2.8Turn the right-hand control to point to main burner ( ) . The appliance can now be controlled using the left-hand control knob.

2.9Turn the left-hand control knob to point to low fire ( ) the main burner will light on low. The burner can now be controlled between low and high settings. Turn the control knob anti-clockwise to increase the flame height and clockwise to decrease the flame height.

THE YELLOW FLAMES WILL APPEAR WHEN THE FIRE HAS GAINED SUFFICIENT HEAT - TYPICALLY 10 TO 20 MINUTES.

IF THE APPLIANCE IS EXTINGUISHED OR GOES OUT IN USE, WAIT 3 MINUTES BEFORE ATTEMPTING TO RELIGHT THE APPLIANCE.

4

Image 4
Contents Marlborough & Stockton Log Effect Stove Range Contents Flue Check Pass Fail Appliance Commissioning ChecklistGAS Check General User InstructionsLighting the Stove Cleaning the Fire Turning OFF the StoveUpgrading Your Stove Handling & Disposal of Fire CeramicsAR1611 Installation Details Gazco Flue Sure SystemFlame Failure Device 10. ‘RUNNING IN’Installation Instructions Technical SpecificationInstallation of the GAS Supply Site RequirementsFlue and Chimney Requirements Appliance LocationInstallation Control UpgradeSafety Precautions Installation of the Stove Flue Pipe InstallationClosure Plate Installation Fuelbed ArrangementsAR1612 Lighting Commissioning CommissioningServicing / Fault Finding Charts Servicing InstructionsServicing Requirements Ignition Functional CheckFlame Failure Functional Check Pilot will not Stay LIT or Fire Goes OUT in USENo Spark YES System OKMain Burner Replacing PartsPilot Unit Piezo Ignition LeadGAS Valve Magnetic Safety Valve Main InjectorPrimary Aeration Plate Changing Between GAS Types Short Spares ListLPG TTBService Records Member of the Stovax Group

Stove Range specifications

Stovax has established itself as a leader in the stove market, renowned for its innovative technologies and commitment to quality. The Stovax Stove Range offers a diverse selection of wood-burning and multi-fuel stoves that combine functionality with aesthetic appeal, ensuring warmth and comfort in any home.

One of the standout features of the Stovax Stove Range is its efficient burning technology. Many models are equipped with advanced air wash systems that keep the glass clean, providing an unobstructed view of the flames while maximizing heat output. This technology not only enhances performance but also ensures that your stove operates with reduced emissions, complying with the stringent environmental standards that consumers demand today.

The Stovax range includes a variety of styles and sizes, catering to both contemporary and traditional interiors. From sleek, modern designs to classic, Victorian-inspired stoves, there is a perfect model for every taste and home décor. The customizable options ensure that the stoves can complement existing furnishings or serve as a stunning focal point in any room.

Another significant characteristic of the Stovax Stove Range is its robust construction. Each stove is crafted from high-quality materials, ensuring durability and longevity. The cast iron bodies provide excellent heat retention, so the warmth radiates even after the fire has dwindled, making these stoves not only beautiful but also practical.

Moreover, many of the Stovax stoves come with the option of a contemporary or traditional log store, enhancing both storage and design aesthetics. The easily accessible storage compartment allows for convenient firewood management, ensuring you can keep the home toasty without the hassle of frequent trips outside.

Stovax also offers a range of accessories and enhancements, including flue systems and chimney liners, ensuring a seamless installation and optimal performance tailored to your specific home requirements. This attention to detail exemplifies Stovax's dedication to customer satisfaction.

In summary, the Stovax Stove Range delivers on multiple fronts, combining advanced technology, aesthetic versatility, robust construction, and thoughtful features. A Stovax stove not only promises warmth but also elevates the charm and elegance of your living space, making it a worthwhile investment for any homeowner seeking comfort and style.