Stovax Stove Range manual Site Requirements, Flue and Chimney Requirements, Appliance Location

Page 9

INSTALLATION INSTRUCTIONS

SITE REQUIREMENTS

 

1. FLUE AND CHIMNEY REQUIREMENTS

1.1

The chimney or flue system must comply with the rules in

 

force and must be a minimum of 127mm in diameter. (5").

1.2 The minimum effect height of the flue or chimney must be 3

 

metres (10ft). Any horizontal flue run from the rear outlet

 

should not exceed 100mm from the back of the appliance.

1.3

The chimney or flue must be free from any obstruction. Any

 

damper plates should be removed or secured in the fully

 

open position and no restrictor plates should be fitted.

1.4

The chimney should be swept prior to the installation of the

 

appliance. However, where it can be seen that the chimney

 

is clean and unobstructed throughout its entire length, it

 

need not be swept.

 

NOTE: If it is intended to fit the stove into a existing brick

 

built chimney without a closure plate, a 5" (127mm) liner

 

must be used. Larger lined flues may work, but in some

 

instances could cause cold start flue problems resulting in

 

nuisance shutdown. Lined flues above 7" (175mm) are not

 

recommended.

 

Due to recent changes to European chimney standards, new

 

flues and chimneys are now described by their temperature,

 

pressure and resistance to corrosion, condensation and fire.

 

To assist in identifying the correct flue system, the minimum

 

flue specification is shown in the technical specification of

 

this book. Existing chimneys are not covered by this system.

 

* Closure Plate Installation

 

This appliance can be installed into a standard fireplace

 

opening with the optional closure plate and spigot extension

4.APPLIANCE LOCATION

4.1This fire must stand on a non-combustible hearth that is at least 12mm thick and projects 50mm minimum from the base of the fire in all directions.

4.2Do not install in a room that contains a bath or shower.

1

AR0604

MINIMUM CLEARANCE

4.3The fire is not suitable for installation against a combustible wall. All combustible materials must be removed from behind the fire.

4.4Ensure you comply with all minimum cleaance measurements, whether or not to combustible materials.

made for the appliance. Note the stove and plate will

require removing, when carrying out the annual service.

(Not suitable for precast letterbox flues).

2.VENTILATION

2.1Consult the rules in force.

Note: This appliance does not normally require any additional ventilation when installed in G.B.

3.INSTALLATION OF THE GAS SUPPLY

3.1

Before installation, ensure that the local distribution

 

conditions (identification of the type of gas and pressure)

 

and the adjustment of the appliance are compatible.

3.2

Ensure that the gas supply is capable of delivering the

 

required amount of gas and is in accordance with the rules

 

in force.

3.3

Soft copper tubing and soft soldered joints can be used but

 

must not be closer than 50mm to the base of the tray.

3.4

A means of isolating the gas supply to the appliance must be

 

provided independent of any appliance control.

3.5

All supply gas pipes must be purged of any debris that may

2

* Air-space to non-combustible

AR0522

*

AR0531

have entered prior to connection to the appliance.

The above dimensions provide adquate clearance at the side and rear of the fire so that the controls can be reached.

9

Image 9
Contents Marlborough & Stockton Log Effect Stove Range Contents Appliance Commissioning Checklist Flue Check Pass FailGAS Check User Instructions GeneralLighting the Stove Turning OFF the Stove Cleaning the FireUpgrading Your Stove Handling & Disposal of Fire CeramicsAR1611 Gazco Flue Sure System Installation DetailsFlame Failure Device 10. ‘RUNNING IN’Technical Specification Installation InstructionsSite Requirements Installation of the GAS SupplyFlue and Chimney Requirements Appliance LocationControl Upgrade InstallationSafety Precautions Installation of the Stove Flue Pipe InstallationFuelbed Arrangements Closure Plate InstallationAR1612 Lighting Commissioning CommissioningServicing Instructions Servicing / Fault Finding ChartsServicing Requirements Ignition Functional CheckPilot will not Stay LIT or Fire Goes OUT in USE Flame Failure Functional CheckNo Spark YES System OKReplacing Parts Main BurnerPilot Unit Ignition Lead PiezoGAS Valve Main Injector Magnetic Safety ValvePrimary Aeration Plate Short Spares List Changing Between GAS TypesLPG TTBService Records Member of the Stovax Group

Stove Range specifications

Stovax has established itself as a leader in the stove market, renowned for its innovative technologies and commitment to quality. The Stovax Stove Range offers a diverse selection of wood-burning and multi-fuel stoves that combine functionality with aesthetic appeal, ensuring warmth and comfort in any home.

One of the standout features of the Stovax Stove Range is its efficient burning technology. Many models are equipped with advanced air wash systems that keep the glass clean, providing an unobstructed view of the flames while maximizing heat output. This technology not only enhances performance but also ensures that your stove operates with reduced emissions, complying with the stringent environmental standards that consumers demand today.

The Stovax range includes a variety of styles and sizes, catering to both contemporary and traditional interiors. From sleek, modern designs to classic, Victorian-inspired stoves, there is a perfect model for every taste and home décor. The customizable options ensure that the stoves can complement existing furnishings or serve as a stunning focal point in any room.

Another significant characteristic of the Stovax Stove Range is its robust construction. Each stove is crafted from high-quality materials, ensuring durability and longevity. The cast iron bodies provide excellent heat retention, so the warmth radiates even after the fire has dwindled, making these stoves not only beautiful but also practical.

Moreover, many of the Stovax stoves come with the option of a contemporary or traditional log store, enhancing both storage and design aesthetics. The easily accessible storage compartment allows for convenient firewood management, ensuring you can keep the home toasty without the hassle of frequent trips outside.

Stovax also offers a range of accessories and enhancements, including flue systems and chimney liners, ensuring a seamless installation and optimal performance tailored to your specific home requirements. This attention to detail exemplifies Stovax's dedication to customer satisfaction.

In summary, the Stovax Stove Range delivers on multiple fronts, combining advanced technology, aesthetic versatility, robust construction, and thoughtful features. A Stovax stove not only promises warmth but also elevates the charm and elegance of your living space, making it a worthwhile investment for any homeowner seeking comfort and style.