Stovax 705088 manual Ignition Lead, Piezo, GAS Valve

Page 18

SERVICING INSTRUCTIONS

REPLACING PARTS

3.7To remove the thermocouple, undo the retaining nut and withdraw the thermocouple. Undo the thermocouple from the back of the gas valve. See Diagrams 5 and 6. Reassemble in reverse order. Do not overtighten.

5

AR0617

6

AR0943c

NOTE: Special care should be taken when replacing the thermocouple to the back of the gas valve ensuring that the sensor wires for the gazco flue sure system are not disconnected.

4.IGNITION LEAD

4.1Gain access to the back of the pilot assembly, see Section 3 above and disconnect the ignition lead from the electrode.

4.2Undo the single screw that secures the left-hand side of the control cover, see Diagram 7.

7

AR0915

4.3To release the right-hand side of the control cover insert the narrow blade screwdriver into the slot shown in diagram 8. Lever it gently and pull from the right-hand side at the same time. The cover will now come off. There is a small cylindrical metal spacer inside the cover; this must be kept and replaced on the fixing screw during reassembly.

8

AR0916

4.4Disconnect the end of the ignition lead from the valve body, see diagram 9, Arrow B, note the existing route of the ignition lead.

9

AR0943a

4.5Replace with a new ignition lead following the same route as the old one. Replace the valve cover and the pilot assembly.

4.6Check the operation of the new ignition lead.

5.PIEZO

5.1The piezo assembly used on this appliance is not serviceable and is unlikely to fail.

6.GAS VALVE

6.1Turn the gas supply off at the isolation device.

6.2Disconnect the 2 x 8mm and 1 x 4mm gas pipe fittings at the back of the gas valve and also disconnect the thermocouple, see Diagram 10, Arrow A.

6.3Remove the control valve cover and disconnect the ignition lead from the gas valve, see section 4.

6.4Undo the two bolts securing the gas valve to the appliance and remove the valve, see diagram 10, Arrow C

6.5Replace in reverse order.

18

Image 18
Contents Clarendon & Ashdon Log Effect Stove Range Contents Appliance Commissioning Checklist Flue Check Pass FailGAS Check User Instructions GeneralLighting the Stove Upgrading Your Stove Cleaning the FireTurning OFF the Stove Handling & Disposal of Fire CeramicsAR1611 Flame Failure Device Installation DetailsGazco Flue Sure System 10. ‘RUNNING IN’Installation Instructions Technical SpecificationFlue and Chimney Requirements Installation of the GAS SupplySite Requirements Appliance LocationSafety Precautions InstallationControl Upgrade Installation of the Stove Flue Pipe InstallationFuelbed Arrangements AR1613 Lighting Commissioning CommissioningServicing Requirements Servicing / Fault Finding ChartsServicing Instructions Ignition Functional CheckNo Spark Flame Failure Functional CheckPilot will not Stay LIT or Fire Goes OUT in USE YES System OKReplacing Parts Main BurnerPilot Unit Ignition Lead PiezoGAS Valve Magnetic Safety Valve Main InjectorPrimary Aeration Plate LPG Changing Between GAS TypesShort Spares List TTBService Records Member of the Stovax Group

705088 specifications

Stovax 705088 is a prominent model in the realm of wood-burning stoves, recognized for its blend of modern technology and traditional aesthetics. This stove is engineered to provide efficient heating while showcasing a classic design that can complement various home interiors.

One of the primary features of the Stovax 705088 is its robust build quality, constructed from high-grade cast iron and steel. This ensures durability, allowing the stove to withstand high temperatures while providing efficient heat output. The stove features a large glass window that offers an unobstructed view of the flames, creating a warm and inviting atmosphere in any living space.

The Stovax 705088 utilizes advanced combustion technology that optimizes fuel efficiency. This technology enhances the burning process, ensuring that wood is combusted thoroughly to release maximum heat with minimal emissions. It also incorporates a clean burn system that reduces smoke production, making it an environmentally friendly option for those concerned about air quality.

Another notable characteristic is its versatility in fuel types. While primarily designed for wood burning, the Stovax 705088 can also accommodate smokeless fuels, providing homeowners with flexibility depending on their fuel availability and preferences. This adaptability not only enhances its usability but also ensures that it meets the various requirements of different regulatory zones.

The stove’s efficiency rating is particularly impressive, achieving high outputs that maximize heat generation relative to fuel consumption. This efficient energy use translates into lower heating costs, making it a practical choice for economically-minded consumers.

In terms of installation, the Stovax 705088 is designed with ease-of-use in mind. Its compact size and straight lines allow it to fit seamlessly into various spaces, whether in a traditional cottage or a modern home. Furthermore, it can be installed as a freestanding unit or as part of a fireplace insert, facilitating additional design flexibility.

In summary, the Stovax 705088 stands out in the wood-burning stove market for its sturdy construction, high efficiency, and elegant design. Its combination of advanced combustion technology and user-friendly features provides a reliable heating solution while enhancing the aesthetic appeal of any room. Whether you are looking for warmth, style, or eco-conscious performance, the Stovax 705088 is a commendable choice.