User Instructions, General, Lighting the Stove

USER INSTRUCTIONS

1.GENERAL

1.1Installation and servicing must be carried out by a competent person in accordance with Gas Safety (Installation and Use) Regulations 1998, the relevant British Standards for Installation, appropriate Codes of Practice and in accordance with the manufacturer’s instructions. It is recommended that a CORGI registered engineer be used for this purpose as they are approved by the HSE under the above regulations.

1.2This appliance is suitable for use in G.B. and I.E. using Natural Gas at a supply pressure of 20mbar or LPG at a supply pressure of 29mbar (Butane) or 37mbar (Propane).

1.3The installation shall also be completed in accordance with:

The Building Regulations issued by The Department of The Environment.

The Building Standards (Scotland) Regulations issued by the Scottish Development Department. For Republic of Ireland, reference should be made to the relevant standards governing installations (IS813:1996)

1.4Read all these Instructions before commencing installation.

1.5This appliance must be installed in accordance with the rules in force and only used in a sufficiently ventilated space.

1.6Ensure that curtains are not positioned above the stove, and that there is at least a clearance of 300mm between the sides of the stove and any curtains.

1.7The manufacturer considers the full outer casing of this stove to be a working surface. Therefore it will become hot whilst in operation. A suitable guard is recommended to protect young children, the aged and the infirm.

1.8This stove must only be operated with the door secured firmly in position. If any cracks appear in the glass the appliance must not be used until the glass panel is replaced.

1.9Do not attempt to burn rubbish in this stove.

1.10Any combustible shelves or surrounding furniture must only be fitted in accordance with the minimum dimensions detailed in Diagram 1.

AR0531a

AR0531b

1.11Contact a competent service engineer to carry out relevant spillage checks etc. following home improvements carried out after installation of this stove (e.g. the fitting of double glazing).

1.12In all correspondence, please quote the appliance type and Serial Number which can be found on the databadge at the rear of the stove.

1.13This product is guaranteed for 2 years from the date of installation, as set out in the terms and conditions of sale between Gazco and your local Gazco dealer. Please consult with your local Gazco dealer if you have any questions. In all correspondence always quote the Model No. and Serial No. Please ensure the commissioning checklist is completed by your installer, as this is a requirement of your Guarantee.

2.LIGHTING THE STOVE

2.1Locate the control valve on the appliance. There are two control knobs on the valve, the right-hand knob controls the pilot ignition and the left-hand knob controls the main burner.

2.2If your appliance has already been upgraded to battery remote control, please refer to the instructions provided with the upgrade to operate the remote control. The following instructions will work for either situation.

AR0914

2.3Ensure that the left-hand control knob is pointing to off ( )

2.4Ensure that the right-hand control knob is pointing to off ( ).

2.5Press in the right-hand control knob and rotate it anticlockwise until a click is heard (keep pressing in) and the knob is pointing to pilot ( ). The pilot should now light. If the pilot has not lit, repeat the procedure until it does.

2.6Keep the control knob pressed in for 10 seconds and then release it, the pilot should stay alight. If the pilot goes out, repeat the procedure until does.

2.7If the pilot will not light after repeated attempts, contact the retailer or installer from whom the appliance was purchased.

2.8Turn the right-hand control to point to main burner ( ) . The appliance can now be controlled using the left-hand control knob.

2.9Turn the left-hand control knob to point to low fire ( ) the main burner will light on low. The burner can now be controlled between low and high settings. Turn the control knob anti-clockwise to increase the flame height and clockwise to decrease the flame height.

THE YELLOW FLAMES WILL APPEAR WHEN THE FIRE HAS GAINED SUFFICIENT HEAT - TYPICALLY 10 TO 20 MINUTES.

IF THE APPLIANCE IS EXTINGUISHED OR GOES OUT IN USE, WAIT 3 MINUTES BEFORE ATTEMPTING TO RELIGHT THE APPLIANCE.

705088 specifications

Stovax 705088 is a prominent model in the realm of wood-burning stoves, recognized for its blend of modern technology and traditional aesthetics. This stove is engineered to provide efficient heating while showcasing a classic design that can complement various home interiors.

One of the primary features of the Stovax 705088 is its robust build quality, constructed from high-grade cast iron and steel. This ensures durability, allowing the stove to withstand high temperatures while providing efficient heat output. The stove features a large glass window that offers an unobstructed view of the flames, creating a warm and inviting atmosphere in any living space.

The Stovax 705088 utilizes advanced combustion technology that optimizes fuel efficiency. This technology enhances the burning process, ensuring that wood is combusted thoroughly to release maximum heat with minimal emissions. It also incorporates a clean burn system that reduces smoke production, making it an environmentally friendly option for those concerned about air quality.

Another notable characteristic is its versatility in fuel types. While primarily designed for wood burning, the Stovax 705088 can also accommodate smokeless fuels, providing homeowners with flexibility depending on their fuel availability and preferences. This adaptability not only enhances its usability but also ensures that it meets the various requirements of different regulatory zones.

The stove’s efficiency rating is particularly impressive, achieving high outputs that maximize heat generation relative to fuel consumption. This efficient energy use translates into lower heating costs, making it a practical choice for economically-minded consumers.

In terms of installation, the Stovax 705088 is designed with ease-of-use in mind. Its compact size and straight lines allow it to fit seamlessly into various spaces, whether in a traditional cottage or a modern home. Furthermore, it can be installed as a freestanding unit or as part of a fireplace insert, facilitating additional design flexibility.

In summary, the Stovax 705088 stands out in the wood-burning stove market for its sturdy construction, high efficiency, and elegant design. Its combination of advanced combustion technology and user-friendly features provides a reliable heating solution while enhancing the aesthetic appeal of any room. Whether you are looking for warmth, style, or eco-conscious performance, the Stovax 705088 is a commendable choice.