SERVICING INSTRUCTIONS
REPLACING PARTS
4
x | X = LPG 10 |
NG 15 | |
|
|
4.7Reassemble in reverse order and replace the pilot gasket with a new one.
4.8Check for gas leaks.
5.Pilot injector
5.1To gain access to the pilot pipe, it is easier if the thermocouple is removed first. To do this follow section 7.
5.2Undo the pilot pipe from the gas valve and from under side of the pilot burner. See diagram 5 arrow B.
5.3Remove the pipe and the injector will drop out from the burner. Take care not to lose or damage the injector.
5.4To replace the injector reverse the above procedure.
5.5Check for gas leaks.
5
BB
AR1993
6.electrode
6.1Remove the lower panel. See diagram 6.
6
AR1341
6.2Pull the ignition lead off the electrode and undo the retaining nut. See diagram 7.
7
AR1349
6.3Replace with a new electrode. Do not over tighten the nut as this could break the new component.
6.4Replace the ignition lead and the lower panel.
7.thermocouple
7.1Remove the lower panel. See diagram 6.
7.2Disconnect the thermocouple from the gas valve. See diagram 8 arrow C.
19