GAS Supply, Appliance location | Stovax PR0776 manual

INSTALLATION INSTRUCTIONS

SITE REQUIREMENTS

TIMBER FRAMED BUILDINGS

1.5It will be necessary to provide additional clearance when the flue passes through a wall containing any combustible materials so as to prevent a fire hazard.

1.6The hole through which the flue will pass, must have a steel sleeve which is positioned so that an air gap of at least 25mm is maintained between the outer surface of the flue, and any part of the sleeve.

1.7For further guidance on the installation of gas appliances in timber framed buildings, contact your local buildings control authority.

2.GAS SUPPLY

2.1Before installation, ensure that the local distribution conditions (identification of the gas type and pressure) and the adjustment of the appliance are compatible.

2.2Ensure that the gas supply is capable of delivering the required amount of gas, and is in accordance with the rules in force.

2.3Factory-sheathed/wrapped soft copper tubing with small ridges which allow pipe movement are considered to be a suitable alternative to a pipe sleeve, when recessing the unit into a cavity wall the gas supply is best fed through the wall from the outside. Soft soldered joints can only be used outside the appliance.

2.4This appliance is supplied complete with a factory fitted isolation device incorporated into the inlet connection. No further isolation device is therefore required.

3.ventilation

3.1This appliance requires no additional ventilation.

4.Appliance location

NOTE: It is recommended you construct the back panel of the fireplace from natural materials cut into three or more sections to prevent cracking. Resin-based materials may not be suitable. This appliance is an effective heat producer and attention must be paid to the construction and finish of the fireplace.

4.1This appliance must stand on a non combustible hearth that is at least 12mm thick. If the fire is greater than 50mm above the floor, then no hearth is required, although due consideration should be given to how the heat may affect the floor material.

4	A
	B	D
		D	DIMENSIONS	MIN	MAX
			DIMENSIONS	MIN	MAX
			A	420 mm	450 mm
	C
	C		B	560 mm	575 mm
			B	560 mm	575 mm
			C	237 mm	-
	E		D	300 mm	-
	E		E	420 mm	-
			E	420 mm	-
			F	12 mm	-
	F				AR0184
					AR0184

4.2The minimum opening dimensions are shown, Diagram 4.

4.3This appliance can only be installed on an outside wall with suitable clearances for the flue terminal and guard (if required).

4.4This appliance is not suitable for installation into a combustible wall. All combustible material must be removed from the area shown, Diagram 5.

5720

300
560		860
150	420	AR1227
150	420

4.5The maximum depth of combustible shelf is 150mm at a minimum height of 300mm above the fireplace opening.

PR0776 specifications

The Stovax PR0776 is a highly regarded multifuel stove that combines traditional craftsmanship with modern technologies, making it an excellent choice for contemporary homes as well as classic interiors. With its striking design and efficient performance, this stove not only enhances the aesthetic of any room but also provides effective heating solutions.

One of the primary features of the Stovax PR0776 is its clean-burning technology. The stove is equipped with advanced combustion systems that allow for maximum efficiency while minimizing emissions. The air wash system works to keep the glass panel clear, ensuring that the beautiful flames are always on display, adding a warm, inviting ambiance to any space.

The Stovax PR0776 offers a generous heat output, making it suitable for heating medium to large-sized rooms. With a nominal output of around 5kW, this multifuel stove can effectively warm your living area while maintaining a cozy atmosphere. The versatility of the stove is further enhanced by its ability to burn both wood and solid fuels, giving users the flexibility to choose their preferred fuel source.

Constructed from high-quality materials, the PR0776 is built to last. Its robust cast iron body ensures durability and longevity, while the modern steel parts provide a sleek finish. The design also features an efficient flue system that optimizes airflow, allowing for better performance and reducing the likelihood of chimney blockages.

The aesthetics of the Stovax PR0776 are impressive, with a classic design that can complement various interior styles. Available in multiple finishes, users can select a look that best suits their home decor. Additionally, the stove can be customized with optional accessories, including different base options and elegant door designs, further enhancing its visual appeal.

In summary, the Stovax PR0776 combines functionality with style, offering homeowners an efficient and beautiful heating solution. With its advanced clean-burning technology, versatility in fuel options, robust construction, and customizable design, this multifuel stove exemplifies the perfect blend of tradition and innovation. Ideal for both heating and creating a focal point in any living space, the Stovax PR0776 is an excellent investment for those seeking quality and performance.