Unpacking, Control Upgrade, Safety Precautions

INSTALLATION INSTRUCTIONS

INSTALLATION

1.UNPACKING

1.1• Remove the appliance from its packaging, and check that it is complete and undamaged

•Put the loose ceramic parts to one side so that they are not damaged during installation.

2.CONTROL UPGRADE

2.1Your fire is fitted with a control valve that can be easily upgraded to battery powered remote control. This upgrade can be fitted by anyone capable of simple DIY jobs and requires no special training. This upgrade can be obtained through your local Gazco stockist.

2.2STANDARD REMOTE CONTROL This remote control can control the fire after the pilot has been lit. It can turn the main burner on and regulate it from low through to high and back again. It can turn the main burner off leaving the pilot burning. GAZCO PART NUMBER 8455.

2.3PROGRAMMABLE THERMOSTATIC AND TIMER REMOTE CONTROL. This remote control can control the gas appliance after the pilot has been lit. In MANUAL MODE it can be used to turn the main burner on and manually regulate it from low through to high and back again. It can be used to turn the main burner off, leaving the pilot burning. In AUTO MODE it will automatically regulate the room temperature to a pre-set temperature. In

TIMER MODE it will turn the fire on and off according to pre-set programme and automatically regulate the room temperature during the two periods. GAZCO PART NO. 8456.

3.SAFETY PRECAUTIONS

3.1This appliance must be installed in accordance with the rules in force, and used only in a sufficiently ventilated space. Please read all instructions before installation and use of this appliance.

3.2These instructions must be left intact with the user.

3.3Do not attempt to burn rubbish on this appliance.

3.4In your own interest, and those of safety, this appliance must be installed by a competent person in accordance with local and national codes of practice. Failure to install the appliance correctly could lead to prosecution.

3.5Keep all plastic bags away from young children.

4. INSTALLATION OF THE GAS SUPPLY

	E-STUDIO BF
NAT GAS @ 20MB		PROPANE @ 37mb

8692BFCHUC		P8692BFCHUC


	E-BOX BF
NAT GAS @ 20MB		PROPANE @ 37mb

8692MCUC		P8692MCUC

8692PBUC		P8692PBUC

TO CHANGE FROM ONE GAS TYPE TO ANOTHER A COMPLETE ENGINE ASSEMBLY WILL BE REQUIRED.

SEE SECTION 12 REPLACING PARTS.

4.1Before installation, ensure that the local distribution conditions (identification of the type of gas and pressure) and the adjustment of the appliance are compatible. See table above.

4.2The position of the gas inlet pipe is shown, Diagram 3.

AR1467

4.3All supply pipes must be purged of any debris that may have entered, prior to connection to the appliance.

4.4The gas supply enters through the silicone panel located on the rear of the outer box. This will need to be slit with a sharp knife prior to passing the supply pipe through.

5.PREPARING THE APPLIANCE

5.1Remove the backing from the self-adhesive silicone sealing strip and apply to the rear flange of the firebox ensuring that the strip is positioned as close to the outer edge as is practically possible, Diagram 1, arrow A.

PR0776 specifications

The Stovax PR0776 is a highly regarded multifuel stove that combines traditional craftsmanship with modern technologies, making it an excellent choice for contemporary homes as well as classic interiors. With its striking design and efficient performance, this stove not only enhances the aesthetic of any room but also provides effective heating solutions.

One of the primary features of the Stovax PR0776 is its clean-burning technology. The stove is equipped with advanced combustion systems that allow for maximum efficiency while minimizing emissions. The air wash system works to keep the glass panel clear, ensuring that the beautiful flames are always on display, adding a warm, inviting ambiance to any space.

The Stovax PR0776 offers a generous heat output, making it suitable for heating medium to large-sized rooms. With a nominal output of around 5kW, this multifuel stove can effectively warm your living area while maintaining a cozy atmosphere. The versatility of the stove is further enhanced by its ability to burn both wood and solid fuels, giving users the flexibility to choose their preferred fuel source.

Constructed from high-quality materials, the PR0776 is built to last. Its robust cast iron body ensures durability and longevity, while the modern steel parts provide a sleek finish. The design also features an efficient flue system that optimizes airflow, allowing for better performance and reducing the likelihood of chimney blockages.

The aesthetics of the Stovax PR0776 are impressive, with a classic design that can complement various interior styles. Available in multiple finishes, users can select a look that best suits their home decor. Additionally, the stove can be customized with optional accessories, including different base options and elegant door designs, further enhancing its visual appeal.

In summary, the Stovax PR0776 combines functionality with style, offering homeowners an efficient and beautiful heating solution. With its advanced clean-burning technology, versatility in fuel options, robust construction, and customizable design, this multifuel stove exemplifies the perfect blend of tradition and innovation. Ideal for both heating and creating a focal point in any living space, the Stovax PR0776 is an excellent investment for those seeking quality and performance.