Stovax PR0776 manual User Instructions, General, Lighting the Appliance, Turning the Appliance OFF

Page 4

USER INSTRUCTIONS

1.general

1.1Installation and servicing must only be carried out by a competent person.

1.2In all correspondence, please quote the appliance type and serial number, which can be found on the databadge adjacent to the control knob.

1.3Ensure that curtains are not positioned above the fire, and that there is a 300mm minimum clearance between the sides of the fire and any curtains.

1.4This product is guaranteed for 2 years from the date of installation, as set out in the terms and conditions of sale between Gazco and your local Gazco dealer. Please consult with your local Gazco dealer if you have any questions. In all correspondence always quote the Model Number and Serial Number.

1.5Parts of this appliance become hot during normal use. It is therefore recommended that a suitable fire guard be used for protection of young children and the infirm.

1.6If any cracks appear in the glass panel do not use the appliance until the panel has been replaced.

2.LIGHTING THE APPLIANCE

2.1Locate the control valve on the appliance. There are two control knobs on the valve, the right hand knob controls the pilot ignition and the left hand knob controls the main burner.

2.2If your appliance has already been upgraded to battery remote control, please refer to the instructions provided with the upgrade to operate the remote control. The following instructions will work for either situation.

1

AR0914

Ensure that the left-hand control knob is pointing to off (

).

Ensure that the right hand control knob is pointing to off ().

Press in the right hand control knob and rotate it anti- clockwise until a click is heard (keep pressing in) and the

knob is pointing to pilot . The pilot should now light. If the pilot has not lit, repeat the procedure until it does.

Keep the control knob pressed for 10 seconds and then release it, the pilot should stay alight. If the pilot goes out, repeat the procedures until it does.

2.3If the pilot will not light after repeated attempts, contact the retailer or installer from whom the appliance was purchased.

Turn the right-hand control to point to main burner . The fire can now be controlled using the left-hand control knob.

Turn the left hand control knob to point to low fire , the main burner will light on low. The burner can

now be controlled between low and high settings. Turn the control knob anticlockwise to increase the flame height and clockwise to decrease the flame height.

3.TURNING THE APPLIANCE OFF

3.1To turn the fire off, locate the control valve, turn the left- hand control knob until it points to off (). The main burner will go out leaving the pilot burning.

3.2To turn the pilot off, locate the control valve, turn the right hand control knob until it points to off (), the pilot will go out.

4.UPGRADING YOUR FIRE

4.1Your fire is fitted with a control valve that can easily be upgraded to battery powered remote control. This upgrade can be fitted by anyone capable of simple DIY jobs and requires no special training. This upgrade can be obtained through your local Gazco stockist.

4.2STANDARD REMOTE CONTROL This remote control can control the fire after the pilot has been lit. It can turn the main burner on and regulate it from low through to high and back again. It can turn the main burner off leaving the pilot burning GAZCO PART NUMBER 8455.

4.3PROGRAMMABLE THERMOSTATIC AND TIMER REMOTE CONTROL. This remote control can control the gas appliance after the pilot has been lit. In MANUAL MODE it can be used to turn the main burner on and manually regulate it from low through to high and back again. It can be used to turn the main burner off, leaving the pilot burning. In AUTO MODE it will automatically regulate the room temperature to a pre-set temperature. In

4

Image 4
Contents Studio& E-box Contents APPLIANCE COMMISSIONING CHECKLIST IMPORTaNT NOTICEUser Instructions GeneralLighting the Appliance Turning the Appliance OFFCleaning the Fire 5A. Cleaning the E-STUDIO5B. Cleaning the E-BOX Advice on Handling and Disposal of Fire CeramicsFuel BED Components E Studio 6A. ARRANGeMENTFitting the Glass Window E-STUDIO Coal Layout Only USE the Correct Type and Quantity of Ceramic ComponentsPebble Layout Fitting the Glass Window E-BOX Flame failure deviceRunning ServicingVentilation Installation detailsHOT SURFACES Installation Instructions Front Part Number P8692PBUCFinish Arts Frame Arts Front Holyrood Front Spanish Front Overall External Dimensions for Both E-STRUDIO and E-BOX Site Requirements Flue and Chimney RequirementsAppliance location GAS SupplyTimber Framed Buildings Control Upgrade Safety PrecautionsInstallation of the GAS Supply UnpackingNon recessed installation Installation of the appliance Recessed installationRemainder of the Cardboard After Cutting to Size 9A. ARRANGeMENT 1259B. ARRANGeMENT of the Fuel BED Components E-BOX Pebble Layout Place the remaining two A3 pebbles as shown in Diagram Installation / Commissioning CommissioningServicing Instructions Servicing RequirementsIgnition Functional Check Flame Failure Functional CheckRemoving the Burner Unit General2A. E-STUDIO 2B. E-BOX Pilot unit4A. Pilot injector E-STUDIO 4B. Pilot injector E-BOXElectrode ThermocouplePiezo IGNITION LEadGas valve Mag unit Main injectorChanging between gas types BOX Studio13A. spare parts list E-STUDIO 13B. spare parts list E-BOXService Records Member of the Stovax Group

PR0776 specifications

The Stovax PR0776 is a highly regarded multifuel stove that combines traditional craftsmanship with modern technologies, making it an excellent choice for contemporary homes as well as classic interiors. With its striking design and efficient performance, this stove not only enhances the aesthetic of any room but also provides effective heating solutions.

One of the primary features of the Stovax PR0776 is its clean-burning technology. The stove is equipped with advanced combustion systems that allow for maximum efficiency while minimizing emissions. The air wash system works to keep the glass panel clear, ensuring that the beautiful flames are always on display, adding a warm, inviting ambiance to any space.

The Stovax PR0776 offers a generous heat output, making it suitable for heating medium to large-sized rooms. With a nominal output of around 5kW, this multifuel stove can effectively warm your living area while maintaining a cozy atmosphere. The versatility of the stove is further enhanced by its ability to burn both wood and solid fuels, giving users the flexibility to choose their preferred fuel source.

Constructed from high-quality materials, the PR0776 is built to last. Its robust cast iron body ensures durability and longevity, while the modern steel parts provide a sleek finish. The design also features an efficient flue system that optimizes airflow, allowing for better performance and reducing the likelihood of chimney blockages.

The aesthetics of the Stovax PR0776 are impressive, with a classic design that can complement various interior styles. Available in multiple finishes, users can select a look that best suits their home decor. Additionally, the stove can be customized with optional accessories, including different base options and elegant door designs, further enhancing its visual appeal.

In summary, the Stovax PR0776 combines functionality with style, offering homeowners an efficient and beautiful heating solution. With its advanced clean-burning technology, versatility in fuel options, robust construction, and customizable design, this multifuel stove exemplifies the perfect blend of tradition and innovation. Ideal for both heating and creating a focal point in any living space, the Stovax PR0776 is an excellent investment for those seeking quality and performance.