Stovax 8627 MA manual TOP Flue Vertical KIT 8524/8524AN, TOP Flue Vertical Offset KIT, GAS Supply

Page 11

INSTALLATION INSTRUCTIONS

SITE REQUIREMENTS

2.3 TOP FLUE VERTICAL KIT (8524/8524AN)

Vertical from the top of the appliance (See Diagram 1C).

A minimum vertical rise 3m (9’10") to a maximum 10m (32’10"). The basic kit comprises:

2 x 1m lengths

1 x 1m terminal length

1 x 52mm restrictor

1 x 47mm restrictor

Extra lengths may be added from the list below.

2.4 TOP FLUE VERTICAL OFFSET KIT (8530)

Used with kit 8524 only (See diagram 5)

A minimum rise of 500mm (191/2˝) is required to the first bend. Refer to diagram 4.

2.5 OPTIONAL FLUE LENGTHS & BENDS

All flue components are 150mm diameter (6")

Nominal

Actual Length

Stainless

Anthracite

Length

 

Finish

Finish

 

 

 

 

200mm

140mm

8527

8527AN

500mm

440mm

8528

8528AN

 

 

 

 

1000mm

940mm

8529

8529AN

 

 

 

 

40° Bend

N/A

8507

8507AN

90° Bend

N/A

8508

8508AN

3.GAS SUPPLY

3.1Before installation, ensure that the local distribution conditions (identification of the type of gas and pressure) and the adjustment of the appliance are compatible.

3.2Ensure that the gas supply is capable of delivering the required amount of gas and is in accordance with the rules in force.

3.3Soft copper tubing can be used to install the appliance. Soft soldered joints can be used externally of the appliance.

3.4The appliance is supplied complete with a factory fitted isolation device incorporated into the inlet connection, no further isolation device is required.

3.5All supply gas pipes must be purged of any debris that may have entered, prior to connection to the appliance.

3.6The gas supply may enter through the floor directly under the appliance or through the knockout panel in the rear RH corner of the outer casing. In both instances, the front lower panel is removable to aid connection of the gas supply and a preformed pipe is factory fitted to make connection to the main inlet isolation device easier.

4.VENTILATION

4.1This appliance requires no additional ventilation.

5.APPLIANCE LOCATION

5.1It is not necessary to site the appliance on a non- combustible floor. However, for practical reasons, the floor should be flat and solid to allow the appliance to be levelled and secured in place.

5.2This appliance may be situated anywhere in the room but due consideration should be taken to ensure that it is sited within the constraints of the allowable flue configuration.

5.3If the appliance is to be sited against a combustible wall, a clearance of 50mm should be allowed between the wall and the rear of the appliance.

11

Image 11
Contents Riva Nemos Contents GAS CHECK APPLIANCE COMMISSIONING CHECKLISTFLUE CHECK Pass FailTurning the Nemos off User InstructionsGeneral Lighting the NemosArrangement of Fuel BED Components Cleaning the NemosPlace log G at the front of the fire between logs D and E HOT SURFACES MA P8627 MA BS P8627 BS Installation InstructionsTechnical Specification Packing ChecklistFlue and Chimney Requirements SITE REQUIREMENTSTOP Flue UP & OUT with Additional Bend Flue OptionsTOP Flue UP & OUT KIT 8534/8534AN GAS Supply TOP Flue Vertical KIT 8524/8524ANTOP Flue Vertical Offset KIT Optional Flue Lengths & BendsInstallation of the appliance InstallationControl upgrade Safety PrecautionsAR1290/1 AR1293 AR1294 Centralise the LOG Between the Burnerports AT Either END FITTING THE DOOR Commissioning Servicing Requirements Servicing / Fault Finding ChartsServicing Instructions Flame Failure Functional Check Ignition Functional CheckMain Burner Replacing PartsGeneral Pilot Unit GAS Valve IGNITION LEADPiezo Primary Aeration Plate Magnetic Safety ValveMain Injector ShoRt Spares List Changing between Gas TypesService Records Page Member of the Stovax Group

8627 MA, P8627 MA, P8627 BS, 8627 BS specifications

Stovax, a renowned name in the fireplace and wood-burning stove industry, has introduced the P8627 series, which includes models P8627 MA and P8627 BS. These products represent a marriage of innovative technology and traditional design, appealing to both modern and classic aesthetics while ensuring high efficiency and performance.

One of the standout features of the P8627 series is its exceptional heat output. These models are engineered to maximize warmth while minimizing fuel consumption, making them an environmentally friendly choice for homeowners. The high-efficiency ratings are complemented by the advanced combustion system that enhances fuel burning, ensuring that more of the wood's energy is converted into heat rather than wasted as smoke.

The P8627 MA model, with its minimalist design and large viewing window, provides an unobstructed view of the fire, creating a warm, inviting ambiance in any living space. It boasts a clean burn technology that significantly reduces emissions, making it an ideal option for eco-conscious consumers. The model's adjustable air control allows users to regulate the burn rate, providing flexibility in how quickly or slowly the fire burns.

On the other hand, the P8627 BS model features a more robust casing, offering added durability while maintaining an elegant appearance. This model also utilizes secondary combustion technology to improve efficiency and reduce particulate emissions. Both models have been tested to comply with stringent environmental standards, ensuring they are safe and efficient for use.

An additional characteristic of the P8627 series is their versatility in installation options. They can be fitted into various settings, whether it be a traditional or contemporary home. With the ability to connect to different flue systems, Stovax ensures that these stoves can accommodate diverse layouts and individual home requirements.

Furthermore, both models are designed with user convenience in mind. The easy-to-use controls, combined with a clean glass design that reduces soot buildup, make maintenance hassle-free. The stylish design options allow homeowners to integrate the stoves seamlessly into their living spaces, enhancing overall aesthetics without compromising functionality.

In summary, the Stovax P8627 MA and P8627 BS models stand out for their efficiency, eco-friendliness, and design versatility. With advanced technologies and user-friendly features, they are an excellent choice for anyone looking to add a reliable and stylish heating solution to their home.