Stovax P8627 BS manual Control upgrade, Safety Precautions, Installation of the appliance

Page 12

INSTALLATION INSTRUCTIONS

INSTALLATION

IMPORTANT: ENSURE THAT THE APPLIANCE IS CORRECTLY ADJUSTED FOR THE GAS TYPE AND CATEGORY APPLICABLE IN THE COUNTRY OF USE. REFER TO DATABADGE AND TECHNICAL SPECIFICATIONS on page 8.

LPG MODELS: THE APPLIANCE IS FACTORY SET TO RUN ON BUTANE (G30). IF IT IS INTENDED TO BE USED ON PROPANE (G31) THE AERATION PLATE SUPPLIED MUST BE FITTED.

TO CHANGE AERATION PLATE REFER TO SECTION 9, servicing instructions.

FOR DETAILS OF CHANGING BETWEEN GAS TYPES REFER TO SECTION 10, SERVICING INSTRUCTIONS.

1.Control upgrade

1.1This appliance is fitted with a control valve that can be easily upgraded to battery powered remote control. There are two versions of this control which can be obtained through your local Gazco stockist.

1.2This upgrade can be fitted before or after installation. Full instructions are included with the kit.

1.3STANDARD REMOTE CONTROL This remote control can control the gas appliance after the pilot has been lit. It can turn the main burner on and regulate it from low through to high and back again. It can turn the main burner off leaving the pilot burning. GAZCO PART NUMBER 8455.

1.4THERMOSTATIC AND TIMER REMOTE CONTROL This remote control can control the gas appliance after the pilot has been lit. In 'MANUAL MODE' it can be used to turn the main burner on and manually regulate it from low through to high and back again. It can also be used to turn the main burner off leaving the pilot burning. In 'AUTO MODE' it will automatically regulate the room temperature. In 'TIMER MODE' it will turn the fire on and off according to a pre-set programme and automatically regulate the room temperature during two on periods. GAZCO PART NUMBER 8456

2.SAFETY PRECAUTIONS

2.1This appliance must be installed in accordance with the rules in force, and used only in a sufficiently ventilated space. Please read these instructions before installation and use of this appliance.

2.2These instructions must be left intact with the user.

2.3Do not attempt to burn rubbish on this appliance.

2.4In your own interest, and those of safety, this appliance must be installed by competent persons in accordance with local and national codes of practice. Failure to install the appliance correctly could lead to prosecution.

2.5Keep all plastic bags away from young children.

2.6Do not place any object on or near to the appliance. Allow adequate clearance above the appliance.

IF THE APPLIANCE IS EXTINGUISHED OR GOES OUT IN USE, WAIT 3 MINUTES BEFORE ATTEMPTING TO RELIGHT THE APPLIANCE.

3. installation of the appliance

NOTE: THERE IS AN OPTIONAL CONVECTION FAN KIT AVAILABLE CODE No. 8576. THIS CAN BE FITTED EITHER DURING OR AFTER INSTALLATION, BUT PROVISION FOR A POWER SUPPLY MUST BE MADE PRIOR TO INSTALLATION OF THE APPLIANCE.

3.1Remove the front of the wooden crate by undoing the four bolts, two at each side. See diagram 1.

1

AR1288

3.2Remove the front of the crate and place to one side. See diagram 2.

2

AR1289

12

Image 12
Contents Riva Nemos Contents APPLIANCE COMMISSIONING CHECKLIST FLUE CHECKPass Fail GAS CHECKUser Instructions GeneralLighting the Nemos Turning the Nemos offCleaning the Nemos Arrangement of Fuel BED ComponentsPlace log G at the front of the fire between logs D and E HOT SURFACES Installation Instructions Technical SpecificationPacking Checklist MA P8627 MA BS P8627 BSSITE REQUIREMENTS Flue and Chimney RequirementsFlue Options TOP Flue UP & OUT KIT 8534/8534ANTOP Flue UP & OUT with Additional Bend TOP Flue Vertical KIT 8524/8524AN TOP Flue Vertical Offset KITOptional Flue Lengths & Bends GAS SupplyInstallation Control upgradeSafety Precautions Installation of the applianceAR1290/1 AR1293 AR1294 Centralise the LOG Between the Burnerports AT Either END FITTING THE DOOR Commissioning Servicing / Fault Finding Charts Servicing InstructionsServicing Requirements Ignition Functional Check Flame Failure Functional CheckReplacing Parts GeneralMain Burner Pilot Unit IGNITION LEAD PiezoGAS Valve Magnetic Safety Valve Main InjectorPrimary Aeration Plate Changing between Gas Types ShoRt Spares ListService Records Page Member of the Stovax Group

8627 MA, P8627 MA, P8627 BS, 8627 BS specifications

Stovax, a renowned name in the fireplace and wood-burning stove industry, has introduced the P8627 series, which includes models P8627 MA and P8627 BS. These products represent a marriage of innovative technology and traditional design, appealing to both modern and classic aesthetics while ensuring high efficiency and performance.

One of the standout features of the P8627 series is its exceptional heat output. These models are engineered to maximize warmth while minimizing fuel consumption, making them an environmentally friendly choice for homeowners. The high-efficiency ratings are complemented by the advanced combustion system that enhances fuel burning, ensuring that more of the wood's energy is converted into heat rather than wasted as smoke.

The P8627 MA model, with its minimalist design and large viewing window, provides an unobstructed view of the fire, creating a warm, inviting ambiance in any living space. It boasts a clean burn technology that significantly reduces emissions, making it an ideal option for eco-conscious consumers. The model's adjustable air control allows users to regulate the burn rate, providing flexibility in how quickly or slowly the fire burns.

On the other hand, the P8627 BS model features a more robust casing, offering added durability while maintaining an elegant appearance. This model also utilizes secondary combustion technology to improve efficiency and reduce particulate emissions. Both models have been tested to comply with stringent environmental standards, ensuring they are safe and efficient for use.

An additional characteristic of the P8627 series is their versatility in installation options. They can be fitted into various settings, whether it be a traditional or contemporary home. With the ability to connect to different flue systems, Stovax ensures that these stoves can accommodate diverse layouts and individual home requirements.

Furthermore, both models are designed with user convenience in mind. The easy-to-use controls, combined with a clean glass design that reduces soot buildup, make maintenance hassle-free. The stylish design options allow homeowners to integrate the stoves seamlessly into their living spaces, enhancing overall aesthetics without compromising functionality.

In summary, the Stovax P8627 MA and P8627 BS models stand out for their efficiency, eco-friendliness, and design versatility. With advanced technologies and user-friendly features, they are an excellent choice for anyone looking to add a reliable and stylish heating solution to their home.