Peavey 23XO manual IEC Mains Connector

Page 9

HIGH GAIN CONTROL (Channel 2) (10)

This controls output level of channel 2 highs signal (signal above the selected crossover point) present at channel 2 high output XLR.

CROSSOVER SELECTOR CONTROL (Channel 2 lows/highs) (11)

This allows users to choose their desired crossover point for lows and highs for channel 2.The control range is between 100 Hz and 1 kHz or 1 kHz and 10 kHz, depending on the position of the Range switch.

RANGE (x10) SWITCH (Channel 2 lows/highs) (12)

This switch multiplies the value indicated on the Crossover Selector Control times 10.When engaged, the range will change from 100 Hz to 1 kHz through 1 kHz to 10 kHz. Range x10 is indicated by the illumination of the red LED above the switch.

R E A R PA N E L

4

3

2

1

IEC MAINS CONNECTOR (1)

This is a standard IEC power connector. An AC mains cord having the appropriate AC plug and ratings for the intended operating voltage is included in the carton.

Never break off the ground pin on any equipment. It is provided for your safety. If the outlet used does not have a ground pin, a suitable grounding adapter should be used and the third wire should be grounded properly.To prevent the risk of shock or fire hazard, always make sure that the equalizer and all associated equipment is properly grounded.

Incorporated into this IEC MAINS CONNECTOR is the MAINS FUSE HOLDER. If for any reason you are unable to power up this unit, remove the fuse by pulling out the holder. Check to see if the fuse is operational. If not, then replace with a fuse of the appropriate value and rating. If the fuse continues to fail contact your nearest Certified Peavey Service Center.

INPUT (Channel 1) (2)

This XLR female 3-pin connector provides a balanced input for channel 1.

LOW OUTPUT (Channel 1) (3)

This XLR male 3-pin connector provides a balanced output for the low frequencies for channel 1.

HIGH OUTPUT (Channel 1) (4)

This XLR male 3-pin connector provides a balanced output for the high frequencies for channel 1.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents PV23XO 2-Way Stereo/3-Way Mono Crossover Page Sound Level dBA, Slow Response Important Safety Instructions⁄ 4 oder weniger Wichtige Sicherheitshinweise⁄ 4 ou inférieur Instructions Importantes DE Securite⁄ 4 o menos Instrucciones Importantes Para SU SeguridadDescription FeaturesMode Switch Power SwitchIEC Mains Connector Input Channel 2 LOW SUM OutputLOW Output Channel 2 High Output Channel 2LOW Gain Control Input Gain ControlMID Gain Control High Gain ControlCrossover Selector Control mids/highs Range x10 Switch mids/highsInput LOW OutputHigh Output MID OutputControls and Switches ConnectorsFrequency Response Merkmale BeschreibungMODE-SCHALTER POWER-SCHALTERIEC-NETZSTECKER Input Kanal 2 LOW Output Kanal 2High Output Kanal 2 LOW-GAIN-REGLER INPUT-GAIN-REGLERMID-GAIN-REGLER HIGH-GAIN-REGLERRANGE-SCHALTER x10 Mitten/Höhen CROSSOVER-WAHLSCHALTER Mitten/HöhenLOW SUM Output Regler UND Schalter FrequenzverhaltenStecker Caractéristiques FrançaisInterrupteur D’ALIMENTATION Selecteur DE ModeConnecteur D’ALIMENTATION IEC Entree Canal 2 Sortie BASSES-FREQUENCES CoupleesSortie BASSES-FREQUENCES Canal 2 Sortie HAUTES-FREQUENCES Canal 2Controle DES Basses Frequences Controle DE Gain D’ENTREEControle DES Frequences Medium Controle DES Hautes FrequencesSelecteur DE Filtre x 10 Médium/Aigu Controle DE LA Frequence DE Filtre Médium/AiguEntree Sortie BASSES-FREQUENCESSortie HAUTES-FREQUENCES Sortie Frequences MediumControles ET Selecteurs Reponse EN FrequencesConnecteurs Características DescripciónInterruptor DE Modo Interruptor DE EncendidoConector Principal DE Corriente Entrada Canal 2 Salida DE Suma DE GravesSalida DE Graves Canal 2 Salida DE Agudos Canal 2Control DE Ganancia DE LA Señal Grave Control DE Ganancia DE EntradaControl DE Ganancia DE LA Señal Media Control DE Ganancia DE LA Señal AgudaInterruptor DE Rango x10 Medios/Agudos Control Selector DEL Crossover Medios/AgudosEntrada Salida DE GravesSalida DE Agudos Salida DE MediosControles E Interruptores Respuesta EN FrecuenciaConectores Peavey Electronics Corporation Limited Warranty

23XO specifications

The Peavey 23XO is a powerful and versatile loudspeaker management system designed to meet the needs of various audio professionals. Known for its robust performance in live sound, installations, and studio work, the 23XO stands out thanks to its advanced features and technologies.

At the heart of the 23XO is an intuitive user interface that simplifies the setup and adjustment process. Its 24-bit digital signal processing (DSP) is a hallmark of performance, ensuring high audio fidelity and precise control over sound engineering. This unit is equipped with a range of processing capabilities, including equalization, crossover settings, and delay adjustments, all of which are crucial for achieving optimal sound quality in any environment.

One of the key features of the Peavey 23XO is its flexibility in routing and configuring audio signals. With multiple input and output options, including XLR connectors, it allows users to easily integrate it into existing sound systems. The system supports both mono and stereo configurations, enabling sound designers to tailor their audio setup according to specific venue requirements.

The 23XO incorporates advanced crossover technology, providing users with customizable crossover frequencies. This adaptability ensures that the audio signal is effectively managed through various speaker components, enhancing the overall sound performance. The high-pass and low-pass filters enable precise control over frequency distribution, ensuring each speaker in the system is operating within its optimal range.

Furthermore, the built-in limiters protect speakers from unwanted peaks and distortion, maintaining audio integrity even at high volumes. This protective feature is especially crucial in live sound situations where sudden changes in dynamics can lead to damage.

The Peavey 23XO also boasts advanced monitoring capabilities, allowing users to visualize audio levels and settings. Its LCD display provides real-time feedback, making it easier to make on-the-fly adjustments during performances.

Overall, the Peavey 23XO is a blend of innovation and reliability, making it an ideal choice for audio professionals looking for a comprehensive loudspeaker management solution. With its combination of cutting-edge technology, user-friendly interface, and flexible configurations, the 23XO continues to be a valuable tool in the world of sound engineering and design.
Top Page Image Contents