Introduction, Safety Measures | Melissa 671-121 manual

INTRODUCTION

To get the best out of your new appliance, please read this user guide carefully before using it for the first time. Take particular note of the safety precautions. We also recommend that you keep the instructions for future reference, so that you can remind yourself of the functions of your appliance.

SAFETY MEASURES

General

•Incorrect use of this appliance may cause personal injury and damage to the appliance.

•Use for its intended purpose only. The manufacturer is not responsible for any injury or damage resulting from incorrect use or handling (see also Guarantee

Terms).

•For domestic use only. Not for outdoor or commercial use.

•For connection to 230 V, 50 Hz only. The appliance must be earthed.

•The appliance, cord or plug must not be placed in water or any other liquid.

•Never touch the appliance, cord or plug with wet or damp hands.

•Do not cover.

•Never leave the appliance unattended when it is switched on.

•Keep the appliance under constant supervision while in use. Children may only use the appliance under the supervision of an adult.

•NEVER use the appliance if the front section is missing or defective.

•Never insert anything into the apparatus – especially when in use.

Use

•Place the appliance on its base on a level, straight and dry surface. The appliance is not to be mounted onto a wall, ceiling or similar.

•Never use the appliance near flammable gasses or liquids, or in a damp environment.

Cord and plug

•Check that it is not possible to pull or trip over the cord or any extension cord.

•Keep the cord and appliance away from heat sources, hot objects and naked flames.

•Turn off the appliance and remove the plug from the socket when cleaning, or when not in use. Avoid pulling the cord when removing the plug from the socket. Instead, hold the plug.

•The cord must not be twisted or wound around the appliance.

•Check regularly that neither the cord nor plug is damaged and do not use if there is any damage, or if it has been dropped on the floor, dropped in water or damaged in any other way.

•If the appliance, cord or plug have been damaged, have them inspected and if necessary repaired by an authorised repair engineer. Never try to repair the appliance yourself. Please contact the store where you bought the appliance for repairs under guarantee. Unauthorised repairs or modifications to the appliance will invalidate the guarantee.

Batteries

•Check plus and minus poles are correctly aligned since incorrectly inserted batteries may damage the remote control.

•Remove the batteries from the remote control, if the appliance is not to be used for a prolonged period.

•Always replace both batteries at the same time.

•Never mix different types of battery (e.g. manganese dioxide batteries and alkaline batteries), old and new batteries or different makes of batteries.

KEY TO MAIN COMPONENTS OF THE APPLIANCE

1.Front guard

2.Rear part

3.Spindle

4.Motor unit

5.Ring

6.Holder for propeller

7.Propeller

8.Lock nut

9.Control panel

10.Stand, upper part

11.Coupling (under collar)

12.Collar

13.Stand, lower part

14.Base collar

15.Base cross section

16.Plastic feet (4)

17.Clamping fixture (not visible on picture)

18.Lock fittings (5)

Control panel/remote control

a.“Swing” button (turning function)

b.“Mode” button (function)

c.“On/Speed” button (switch on/speed)

d."Timer" button (timer function)

e.“Off” button (switch off)

PREPARING THE APPLIANCE

Clean the appliance before using it (see

the section “Cleaning” below). Assemble the appliance before use following the instructions below.

1.Attach the rear part (2) to the motor unit (4) so that the two dowels on the motor unit fits into the grooves of the rear part ring. The handle at the back of the rear part must face upwards.

2.Guide the ring (5) over the spindle (3) so that the flange is against the rear part and screw the ring into position (see picture I)

3.Guide the propeller (7) over the spindle and press it as far as it will go (see picture II)

4.Guide the holder for the propeller (6) over the spindle and secure it (see picture III)

5.Attach the front guard (1) to the rear part by attaching the lock fitting (18) on the top of the front guard to the rear part. Make sure that the hole for the lock nut is level with the corresponding hole at the bottom of the rear part.

6.Tilt the remaining four lock fittings so that they join the edge of the front guard and the rear part.

7.Attach the lock nut (8) in the hole below and securely tighten the nut (see picture IV).

8.Join the two sections of the base cross section (15) as shown in picture V.

9.Place the lower part of the stand (13) on the cross section so that the mounting holes sits above the holes in the base cross section and secure it using the four mounting screws (see picture VI).

10.Slide the base collar (14) down the stand and press it into position on the base cross section as shown in picture VII.

11.Press the four plastic feet (16) into the ends of the base cross section as shown in picture VIII.

671-121 specifications

Melissa 671-121 is a cutting-edge technology platform designed to streamline various processes in modern business environments. This innovative system is engineered to enhance efficiency and productivity while maintaining strong security protocols. With Melissa 671-121, organizations can expect enhanced data management, optimized workflow processes, and improved team collaboration.

One of the standout features of Melissa 671-121 is its robust data integration capabilities. The platform supports a wide array of data sources, allowing organizations to consolidate information from various points into a single, cohesive database. This not only simplifies access to critical data but also provides a holistic view of operations, enabling informed decision-making.

Another key characteristic of Melissa 671-121 is its user-friendly interface. Designed with intuitive navigation and easy-to-use tools, the platform allows users of all technical levels to quickly adapt and utilize its functionalities. This helps reduce training time and encourages user engagement, making it a favored choice for businesses of all sizes.

The technological backbone of Melissa 671-121 includes advanced analytics and machine learning algorithms. These technologies enable organizations to gain insights from their data, identify trends, and forecast future outcomes. Such analytical capabilities can accelerate strategic planning and enhance competitive advantage in an ever-evolving marketplace.

In terms of security, Melissa 671-121 prioritizes data protection with features like end-to-end encryption and role-based access controls. Organizations can confidently manage sensitive information without the fear of unauthorized access or data breaches. This security framework not only safeguards business data but also complies with industry regulations, reassuring stakeholders of its reliability.

Collaboration tools are integrated seamlessly into the platform, allowing team members to work together in real-time, regardless of location. Features such as shared workspaces, instant messaging, and project management tools enhance collaboration, fostering innovation and creative problem-solving.

Overall, Melissa 671-121 is designed to meet the demands of today's dynamic business landscape. By leveraging advanced technologies and user-centric design, it empowers organizations to maximize their operational efficiency while maintaining a secure and collaborative environment. Whether for data management, strategic analysis, or team collaboration, Melissa 671-121 stands out as a vital asset for any forward-thinking organization looking to thrive in a competitive world.