Universal CD-9795 manual OPERATION, Testing & Maintenance

Page 8

5.To activate 9 volt battery and alarm, hold the QUICK DRAWpull-out battery drawer closed, pull and remove the PULL-TAB. Discard PULL-TAB.

6.See "TAMPER LOCKING PIN."

7.Turn on AC power and press the TEST/RESET button. Check the LED's for proper operation (see "TESTING YOUR ALARM"). After test sequence, the Green LED lights to indicate AC power and blinks off approximately every 20 seconds to indicate proper operation.

OPERATION, TESTING & MAINTENANCE

OPERATION: The alarm is operating once the power is connected and turned on (the battery must also be installed).

SMOKE/COMBUSTION PRODUCTS ALARM CONDITION: When products of combustion are sensed, the unit sounds a loud SMOKE alarm pattern which continues until the air is cleared. For the SMOKE alarm pattern, this alarm incorporates the internationally recognized horn signal for evacuation. During smoke alarm mode, the horn produces three beeps followed by a two second pause and then repeats.

CARBON MONOXIDE CONDITION: When CO is sensed at a high level or at a low level for a lengthy period of time, the unit sounds a loud CO alarm pattern (4 short horn pulse, pause, repeat) which continues until the air is cleared or the alarm is reset. The Red LED will flash on simultaneously with the horn pulses.

SERVICE/TROUBLE CONDITION: Periodically, the alarm's circuitry is tested. If an error is detected, the alarm will sound a double "beep" and the Yellow LED will flash on twice approximately every 40 seconds. If this occurs, reset your alarm (see "RESETTING YOUR ALARM"). If the SERVICE/ TROUBLE signal persists, it is an indication of circuit malfunction and that the alarm requires immediate servicing.

TESTING YOUR ALARM: Test alarm weekly for proper operation by pushing, then releasing, the TEST/SILENCE button. The alarm will then test itself for proper operation of BOTH the SMOKE and CO detection and alarm circuits. The Red LED will begin to flash rapidly and the alarm will indicate two cycles of the SMOKE alarm pattern. The Red LED will stop flashing during the second SMOKE alarm pattern. This will be followed by two cycles of the CO alarm pattern, during which the Green LED is off, the Yellow LED is on and the Red LED flashes on simultaneously with the horn pulses.

RESETTING YOUR ALARM: To reset your alarm, initiate the Test cycle per TESTING YOUR ALARM above. While the alarm is indicating the CO alarm patterns of the Test Cycle, press the TEST/ SILENCE button again and HOLD it until the Test Cycle is completed (when the Yellow LED turns off, approximately 5 seconds).

STANDBY (NON-ALARM) CONDITION: Whenever AC power is present, the Green LED is on and blinks off approximately every 20 seconds and the Red LED is off and flashes on every 40 seconds. If powered by the backup battery (DC) only, both the Green and the Red LED's are off and flash on every 40 seconds.

LOCAL (ORIGINATING ALARM) CONDITION: For BOTH the SMOKE and CO alarm conditions, the Red LED flashes on rapidly and the unit emits a loud, pulsating alarm (refer to the OPERATION section to differentiate between the SMOKE and CO alarm patterns).

REMOTE (NON-ORIGINATING ALARM) CONDITION: For BOTH the SMOKE and CO alarm conditions, the Red LED is off and the unit emits a loud, pulsating alarm (refer to the OPERATION section to differentiate between the SMOKE and CO patterns).

INITIATING ALARM INDICATOR (IAI) CONDITION: Whenever a unit comes out of the LOCAL ALARM CONDITION, it will display an IAI until manually reset (see "RESETTING YOUR ALARM"). If the unit indicated a SMOKE alarm, the IAI is the Red LED flashing on for 1 second every 5 seconds. If the unit indicated a CO alarm, the IAI is the Green LED which flashes on for 1 second, then off for 1 second and then repeats this cycle until it is manually reset (see "RESETTING YOUR ALARM").

Page 8

Image 8
Contents Read ALL Instructions Limitations and FunctionsImportant Safety Information What YOU should do if the CO Alarm SoundsWhat YOU should Know about Carbon Monoxide CO Mild ExposureWhat YOU should do if the Smoke Alarm Sounds Important ConsiderationsLocation RecommendationsAvoid These Locations Electrical Shock Hazard Installation and OperationInstallation Instructions CAUTION!! Read Carefully Input OPERATION, Testing & Maintenance Page Backup Battery Replacement Repairs and ServicesUniversal Five Year Limited Warranty

CD-9795 specifications

The Universal CD-9795 is a versatile and high-quality compact disc player that has garnered attention for its impressive range of features and technologies. Designed with both audiophiles and casual listeners in mind, the CD-9795 sets a standard in audio performance, functionality, and build quality.

At the heart of the CD-9795 is its state-of-the-art digital-to-analog converter (DAC), which ensures that audio playback is crisp and clear. This high-resolution DAC is coupled with advanced error correction technology, allowing the player to read discs with precision, even in less-than-ideal conditions. As a result, users can enjoy their music with minimal distortion and noise.

The CD-9795 supports a wide variety of audio formats, including standard CDs, CD-R/RW, and MP3 discs. This versatility makes it an ideal choice for those with extensive music collections stored across various media. Additionally, the player is equipped with a seamless playback feature, allowing for smooth transitions between tracks without interruption.

One of the standout characteristics of the Universal CD-9795 is its robust build quality. Constructed with a solid chassis and premium materials, it is designed to minimize vibrations and ensure optimal performance. The player features a sleek and user-friendly interface, complete with an intuitive remote control that makes navigating playlists and settings effortless.

Connectivity is another area where the CD-9795 excels. It offers multiple output options, including RCA, optical, and coaxial connections, making it compatible with a wide range of audio systems. This flexibility allows users to integrate the player easily into their existing setups, enhancing their overall listening experience.

In terms of technology, the Universal CD-9795 incorporates advanced features such as programmed playback and random play modes, enabling users to customize their listening experience. The display is easy to read and provides essential information about the track being played, including the time elapsed and remaining.

Overall, the Universal CD-9795 is an exceptional compact disc player that embodies quality, versatility, and advanced technology. Its combination of high-fidelity audio reproduction, robust construction, and user-friendly features make it a standout choice for anyone seeking to elevate their music listening experience. Whether at home or on the go, the CD-9795 promises to deliver impressive performance every time.