Universal CD-9795 Installation and Operation, Installation Instructions CAUTION!! Read Carefully

Page 6

THIS COMBINATION SMOKE/CO ALARM WILL NOT WORK WITHOUT 120 VAC POWER AND A GOOD BATTERY PROPERLY INSTALLED. THE ALARM SHOULD BE TESTED WHEN INSTALLED AND THEN TESTED WEEKLY AFTER THAT.

INSTALLATION AND OPERATION

INSTALLATION INSTRUCTIONS: CAUTION!! READ CAREFULLY.

CAUTION: THIS UNIT IS SEALED. THE COVER IS NOT REMOVABLE!

This combination smoke/CO alarm requires constant 120 Volt AC power AND/OR a working 9 Volt battery to operate properly. This combination smoke/CO alarm WILL NOT work if AC power is not connected or if it has failed or been interrupted for any reason AND the battery is removed, drained or improperly connected. DO NOT use any other kind of battery except as specified in this manual.

NOTE: AC/DC combination alarms offer added protection in the event of a power failure or a drained battery.

Test alarm immediately following installation and weekly for proper operation by pushing the test button. The alarm will then test itself for proper operation. The alarm then resumes normal operation.

A mounting plate is provided on the back of the alarm.

Remove the mounting plate from the back of the alarm by holding the mounting plate and twisting the alarm in the direction indicated by the "TURN TO REMOVE" arrow on the side of the alarm base.

Installation of this unit must conform to the electrical codes in your area; Article 760 of the National Electrical Code, NFPA 720/CO Alarms, NFPA 72, 101; SBC (SBCCI); UBC (ICBO); NBC (BOCA): OTFDC (CABO), and any other local or building codes that may apply. Wiring and installation must be performed by a licensed electrician. Failure to follow these guidelines may result in injury or property damage.

This unit must be powered by a 24-hour, 120V AC 60Hz circuit. Be sure the circuit cannot be turned off by a switch, dimmer or ground fault circuit interrupter. Failure to connect this unit to a 24-hour circuit may prevent it from providing constant protection.

IMPORTANT: Do not subject this alarm to megger, high voltage or high-pot tests. Remove the alarm(s) before high-potting tests occur on the circuit or system. (Ref. Section 550-17, National Electric Code, 2002 Edition).

ELECTRICAL SHOCK HAZARD

Turn off power to the area where you will install this unit at the circuit breaker or fuse box before beginning installation. Failure to turn off the power before installation may result in serious electrical shock, injury or death.

TAMPER LOCKING PIN: To make your alarm somewhat tamper resistant, a locking pin has been provided (break-away part of mounting plate). Using this tamper pin will deter children and others from removing the alarm from the mounting plate. To use the tamper pin, insert it into the hole in the side of the alarm after the alarm has been installed on the mounting plate. Using long nose pliers, pull the tamper pin out of the hole. It is now possible to remove the alarm from the mounting plate.

1.Turn the alarm counterclockwise in the direction indicated by the "TURN TO REMOVE" arrow on the side of the alarm base to remove it from the mounting plate. NOTE: The alarm is sealed and the cover is not removable.

2.Wiring Instructions:

a.The appropriate power supply is 120 Volt single phase power supplied from a non-switchable circuit NOT protected by a ground fault circuit interrupter.

b.Turn off main power to the circuit before wiring the alarm.

c.There are three pigtail leads (black, white and yellow) coming from the AC QUICK CONNECTOR. The proper wire connection is as follows:

WIRES FROM QUICK CONNECTOR

CONNECT TO

BLACK

"HOT" side of AC line

WHITE

"NEUTRAL" side of AC line

YELLOW

Interconnect wires of other units

Page 6

Image 6
Contents Read ALL Instructions Limitations and FunctionsWhat YOU should Know about Carbon Monoxide CO Important Safety InformationWhat YOU should do if the CO Alarm Sounds Mild ExposureWhat YOU should do if the Smoke Alarm Sounds Important ConsiderationsLocation RecommendationsAvoid These Locations Installation and Operation Installation Instructions CAUTION!! Read CarefullyElectrical Shock Hazard Input OPERATION, Testing & Maintenance Page Backup Battery Replacement Repairs and ServicesUniversal Five Year Limited Warranty

CD-9795 specifications

The Universal CD-9795 is a versatile and high-quality compact disc player that has garnered attention for its impressive range of features and technologies. Designed with both audiophiles and casual listeners in mind, the CD-9795 sets a standard in audio performance, functionality, and build quality.

At the heart of the CD-9795 is its state-of-the-art digital-to-analog converter (DAC), which ensures that audio playback is crisp and clear. This high-resolution DAC is coupled with advanced error correction technology, allowing the player to read discs with precision, even in less-than-ideal conditions. As a result, users can enjoy their music with minimal distortion and noise.

The CD-9795 supports a wide variety of audio formats, including standard CDs, CD-R/RW, and MP3 discs. This versatility makes it an ideal choice for those with extensive music collections stored across various media. Additionally, the player is equipped with a seamless playback feature, allowing for smooth transitions between tracks without interruption.

One of the standout characteristics of the Universal CD-9795 is its robust build quality. Constructed with a solid chassis and premium materials, it is designed to minimize vibrations and ensure optimal performance. The player features a sleek and user-friendly interface, complete with an intuitive remote control that makes navigating playlists and settings effortless.

Connectivity is another area where the CD-9795 excels. It offers multiple output options, including RCA, optical, and coaxial connections, making it compatible with a wide range of audio systems. This flexibility allows users to integrate the player easily into their existing setups, enhancing their overall listening experience.

In terms of technology, the Universal CD-9795 incorporates advanced features such as programmed playback and random play modes, enabling users to customize their listening experience. The display is easy to read and provides essential information about the track being played, including the time elapsed and remaining.

Overall, the Universal CD-9795 is an exceptional compact disc player that embodies quality, versatility, and advanced technology. Its combination of high-fidelity audio reproduction, robust construction, and user-friendly features make it a standout choice for anyone seeking to elevate their music listening experience. Whether at home or on the go, the CD-9795 promises to deliver impressive performance every time.