Universal CD-9795 manual Backup Battery Replacement, Repairs and Services

Page 10

BACKUP BATTERY REPLACEMENT

Disconnect AC power before changing battery. Shock hazard exists if AC power is miswired.

This alarm uses a 9 Volt Alkaline battery. The battery should last for at least one year under normal operating conditions. The alarm has a low battery indicator, an audible "beep." It will operate at 30- 40 second intervals for a minimum of 7 days. When this indication occurs, replace the battery with an Alkaline type (Eveready Energizer #522, Duracell #MN1604), or Lithium type (ULTRALIFE U9VL-

J), from your local retailer. Use the convenient QUICK DRAWpull-out battery drawer for easy battery replacement.

Slide the QUICK DRAWpull-out battery drawer open and remove the battery. While observing polarity, push the replacement battery into the battery drawer until it is held securely in place. Carefully close the QUICK DRAWpull-out battery drawer.

Use only the batteries specified. Use of different batteries may have a detrimental effect on the alarm. The constant exposures to high or low temperatures or high humidity may reduce battery life.

When battery door is open, the battery will not power the alarm even if the battery is properly installed. If AC power for the alarm is disconnected, interrupted or not present for any reason, the battery backup will not power the alarm and your protection will be removed.

Do not attempt to repair this combination alarm. Doing so will void your warranty.

REPAIRS AND SERVICES

The smoke alarm contains less than 1 microcurie (37 kilobecquerel) of Americium 241, a radioactive material. The distribution of these ionization type smoke alarms is licensed by the U.S. Nuclear Regulatory Commission; the consumer is exempt from any licensing or requirements. If the smoke alarm is defective in any way, do not tamper with the unit. Return the unit for servicing. (See warranty for instructions or in-warranty returns.) There will be a service charge for repairing out of warranty units.

NATIONAL FIRE PROTECTION ASSOCIATION REQUIRED PROTECTION

For your information, the National Fire Protection Association's Standard 72, reads as follows: “11.5.1 One- and Two-Family Dwelling Units. 11.5.1.1 Smoke Detection. Where required

by applicable laws, codes, or standards for the specified occupancy, approved single- and multiple-station smoke alarms shall be installed as follows: (1) In all sleeping rooms. Exception: Smoke alarms shall not be required in sleeping rooms in existing one- and two-family dwelling units. (2) Outside of each separate sleeping area, in immediate vicinity of the sleeping rooms. (3) On each level of the dwelling unit, including basements. Exception: In existing one- and two-family dwelling units, approved smoke alarms powered by batteries are permitted.

“A.11.8.3 Are More Smoke Detectors Desirable? The required number of smoke detectors might not provide reliable early warning protection for those areas separated by a door from the areas protected by the required smoke detectors. For this reason, it is recommended that the householder consider the use of additional smoke detectors for those areas for increased protection. The additional areas include the basement, bedrooms, dining room, furnace room, utility room, and hallways not protected by the required smoke detectors. The installation of smoke detectors in kitchens, attics (finished or unfinished), or garages is not normally recommended, as these locations occasionally experience conditions that can result in improper operation.”

The equipment should be installed using wiring methods in accordance with the National Fire Protection Association’s Standard 72, Chapter 11. (National Fire Protection Association, Batterymarch Park, Quincy, MA 02269).

THIS PRODUCT IS LISTED TO UL STANDARD FOR SAFETY,

UL217, BY UNDERWRITERS LABORATORIES

Page 10

Image 10
Contents Read ALL Instructions Limitations and FunctionsWhat YOU should Know about Carbon Monoxide CO Important Safety InformationWhat YOU should do if the CO Alarm Sounds Mild ExposureWhat YOU should do if the Smoke Alarm Sounds Important ConsiderationsLocation RecommendationsAvoid These Locations Installation Instructions CAUTION!! Read Carefully Installation and OperationElectrical Shock Hazard Input OPERATION, Testing & Maintenance Page Backup Battery Replacement Repairs and ServicesUniversal Five Year Limited Warranty

CD-9795 specifications

The Universal CD-9795 is a versatile and high-quality compact disc player that has garnered attention for its impressive range of features and technologies. Designed with both audiophiles and casual listeners in mind, the CD-9795 sets a standard in audio performance, functionality, and build quality.

At the heart of the CD-9795 is its state-of-the-art digital-to-analog converter (DAC), which ensures that audio playback is crisp and clear. This high-resolution DAC is coupled with advanced error correction technology, allowing the player to read discs with precision, even in less-than-ideal conditions. As a result, users can enjoy their music with minimal distortion and noise.

The CD-9795 supports a wide variety of audio formats, including standard CDs, CD-R/RW, and MP3 discs. This versatility makes it an ideal choice for those with extensive music collections stored across various media. Additionally, the player is equipped with a seamless playback feature, allowing for smooth transitions between tracks without interruption.

One of the standout characteristics of the Universal CD-9795 is its robust build quality. Constructed with a solid chassis and premium materials, it is designed to minimize vibrations and ensure optimal performance. The player features a sleek and user-friendly interface, complete with an intuitive remote control that makes navigating playlists and settings effortless.

Connectivity is another area where the CD-9795 excels. It offers multiple output options, including RCA, optical, and coaxial connections, making it compatible with a wide range of audio systems. This flexibility allows users to integrate the player easily into their existing setups, enhancing their overall listening experience.

In terms of technology, the Universal CD-9795 incorporates advanced features such as programmed playback and random play modes, enabling users to customize their listening experience. The display is easy to read and provides essential information about the track being played, including the time elapsed and remaining.

Overall, the Universal CD-9795 is an exceptional compact disc player that embodies quality, versatility, and advanced technology. Its combination of high-fidelity audio reproduction, robust construction, and user-friendly features make it a standout choice for anyone seeking to elevate their music listening experience. Whether at home or on the go, the CD-9795 promises to deliver impressive performance every time.