HOW to Operate, Thermostat control | Kambrook KCE60 guide

20.Switch off at the control switch and power outlet, then unplug and allow heater to cool down before cleaning or storing. Use this heater only as described in this instruction manual. Any other use not recommended by the manufacture may cause fire electric shock or injury and voids all warranties.

21.Regularly inspect the supply cord, plug, control settings, air inlets and outlets and main housing for any damage. If found damaged in any way, immediately cease use of the heater and return to Kambrook or an authorised service agent for inspection or repair.

22.The installation of a residual current device (safety switch) is recommended to provide additional safety protection when using electrical appliances. It is advisable that a safety switch with a rated residual operating current not exceeding 30mA be installed in the electrical circuit. See your electrician for professional advice.

HOW TO OPERATE:

1.Remove your heater from its carton and associated protective wrapping, and unwind the cord to its full length and remove any protective cardboard or foam that may have been used to minimize transportation damage. Place the heater on a firm, level surface in a stable upright position. Visually inspect the air inlet and outlets to ensure no foreign material is blocking these areas. The heater must always be operated with the rear air filter in position.

2.Plug the cord into a 230-240V electrical outlet. Be sure the plug fits tightly as a loose fit will cause overheating and damage the plug. To avoid an electrical circuit overload, it is recommended that no other appliances are plugged into the same circuit with your heater when you switch the unit on.

3.This heater has three heat control settings OFF, ”LOW” HEAT AND “HIGH” HEAT, located at the top of the unit, along with an adjustable thermostat control. “LOW” HEAT (750W) is the lowest heat setting and “HIGH” HEAT (1500W) is the highest.

4.To select these settings DO NOT twist or rotate the heat control and thermostat control located on the top of the heater. To turn the heater on, grip the heat setting knob and lightly pull all the way up to the “HIGH” setting. There will be an audible click as the wedge moves through the settings. The power indicator light will illuminate to indicate that power is on.

5.To decrease the heat settings push down on the heat control. There will be an audible click as the wedge moves through the settings.

6.To turn the heater OFF push the heat control (used to select “LOW” HEAT or “HIGH” HEAT settings) all the way down and the heater will turn off. The power indicator light will go out.

Thermostat control

Turn the heat control to the HIGH setting by pulling the knob up. Pull up the thermostat control to the highest thermostat setting.

Let the heater run until the desired room temperature is achieved.Then push the knob down until you hear a click sound.The unit will stop.At this setting, your heater will automatically cycle on and off to maintain the desired room temperature.

Once the thermostat is activaed, you can simply pull the knob up or down if you want to change the temperature.

Thermo Guard Overheating Safety Device

Your heater is fitted with a safety device that switches off the heater in the event of overheating. Should this heater stop working, turn off the heater and inspect for blockages in air inlet or outlets.Wait at least five minutes for the protection system to reset before attempting to restart the heater.

If the heater fails to operate or the safety device switches off again, return the heater to your nearest service centre for examination or repair.

KCE60 specifications

The Kambrook KCE60 is a versatile and efficient appliance designed to meet the needs of modern kitchens. This electric kettle is not just another kitchen gadget; it is a blend of style, functionality, and advanced technology that enhances daily cooking and beverage preparation.

One of the standout features of the Kambrook KCE60 is its powerful 2200-watt heating element, which allows for rapid boiling. With the ability to heat water in a matter of minutes, this kettle is perfect for those busy mornings or when preparing tea and coffee for guests. The kettle's large 1.7-liter capacity makes it suitable for families or gatherings, ensuring that there is enough hot water for everyone.

The KCE60 is equipped with a 360-degree swivel base, making it easy to lift the kettle off and place it back without any hassle. This feature is particularly beneficial in a multi-user household where different family members may be using the kettle throughout the day. Additionally, the kettle has a built-in cord storage compartment that helps keep your countertop tidy and organized.

Safety is also a priority with the Kambrook KCE60. It boasts a boil-dry protection feature that automatically shuts off the kettle when there is insufficient water. This not only prevents damage to the kettle but also provides peace of mind, especially when it is left unattended. The kettle's heat-resistant handle ensures a safe grip and minimizes the risk of burns while pouring.

The KCE60 features a clear water level indicator, making it easy to gauge how much water is in the kettle at a glance. It also comes with a removable and washable filter that helps reduce limescale build-up, ensuring that your beverages taste just as they should—pure and fresh.

Aesthetically, the Kambrook KCE60 has a sleek and modern design that fits well with any kitchen decor. It is available in various colors, allowing users to choose a model that complements their personal style.

In conclusion, the Kambrook KCE60 electric kettle is an impressive addition to any kitchen. With its rapid boiling capabilities, user-friendly design, and safety features, it perfectly combines practicality with style. Ideal for tea aficionados, coffee lovers, or anyone needing hot water quickly, the Kambrook KCE60 stands out as a reliable kitchen companion.