The Setup Menu

Auto Off

dbutton Mztab MAuto off

If no operations are performed for a specified amount of time, the monitor turns off and the camera enters standby mode (A 21).

This setting determines the amount of time that passes before the camera enters standby mode. You can select 30 s, 1 min (default setting), 5 min, or 30 min.

Reference Section

CWhen the Monitor Has Turned Off to Save Power

When the camera is in standby mode, the power-on lamp blinks.

If no operations are performed for approximately another three minutes, the camera will turn off automatically.

When the power-on lamp is blinking, pressing any of the following buttons will turn the monitor back on:

Power switch, shutter-release button, A button, c button, or b (e movie-record) button

CNotes About Auto Off

The time that passes before the camera enters standby mode is fixed in the following situations:

When a menu is displayed: 3 minutes

During slide show playback: Up to 30 minutes

When the AC adapter EH-62F is connected: 30 minutes

E65

Page 171
Image 171
Nikon 26277, COOLPIXS6200RED manual Auto Off, E65, When the Monitor Has Turned Off to Save Power, Dbutton Mztab MAuto off