Using ViewNX 2

Transferring Images to the Computer

1Choose how images will be copied to the computer.

Choose one of the following methods:

Direct USB connection: Turn the camera off and ensure that the memory card is inserted in the camera. Connect the camera to the computer using the supplied USB Cable UC-E6. The camera automatically turns on.

SD card slot: If your computer is equipped with an SD card slot, the card can be inserted directly in the slot.

SD card reader: Connect a card reader (available separately from third-party suppliers) to the computer and insert the memory card.

If a message is displayed prompting you to choose a program, select Nikon Transfer 2.

When using Windows 7

If the dialog shown at right is displayed, follow the steps below to select Nikon Transfer 2.

1Select Nikon Transfer 2 for Import pictures and videos. Under Import pictures and videos, click Change program. A program selection dialog

will be displayed; select Import File using Nikon Transfer 2 and click OK.

2 Double-click Import File.

If the memory card contains a large number of images, it may take a while for Nikon Transfer 2 to start. Wait until Nikon Transfer 2 starts.

BConnecting the USB Cable

Playback Features

The connection may not be recognized if the camera is connected to the computer via a USB hub.

77

 

Page 93
Image 93
Nikon COOLPIXS6200RED, 26277 manual Transferring Images to the Computer, Choose how images will be copied to the computer