Nikon COOLPIXS6200RED manual Using the Flash Flash Modes, Press the multi selector Hmflash mode

Features That Can Be Set Using the Multi Selector

Using the Flash (Flash Modes)

You can set the flash mode to match the shooting conditions.

1Press the multi selector H(mflash mode).

Shooting Features

2Use the multi selector to select the desired mode and press the kbutton.

•See “Available Flash Modes” (A57) for more information.

•If a setting is not applied by pressing the k button within a few seconds, the selection will be canceled.

•When U(auto) is applied, Dis only displayed for a few seconds, regardless of Monitor settings settings (A88).

Auto

29m 0s

7 6 0

3 Frame the subject and take a picture.

• The flash lamp indicates the status of the flash when you press the shutter-release button halfway.

- On: The flash will fire when you press the shutter-release button all the way down.

-Blinking: The flash is charging. The camera cannot take pictures.

-Off: The flash will not fire when a picture is taken.

•If the battery is low, the monitor will turn off in order to save power while the flash is charging.

CEffective Range of the Flash

When ISO sensitivity is set to Auto, the flash has a range of 0.5 to 4.6 m (1 ft 8 in. to 15 ft) at the maximum wide-angle zoom position and a range of 0.5 to 3.0 m (1 ft 8 in. to 9 ft 10 in.) at the

56maximum telephoto zoom position.